
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Custom LED Indicator PCB designed in KiCad.
Traffic light module is an open-source printed circuit board by Tejwin-linto-ee, from the Tejwin-linto-ee/Traffic-Light-LED-Module-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 20 × 85.5 mm with 7 parts on 7 nets, routed with 40 tracks and 0 vias.
Its parts include 3 resistors and 1 connector.
A custom Traffic Light LED Indicator PCB designed using KiCad.
This project consists of a compact three-LED indicator module featuring:
Each LED is driven through a 220 Ω current-limiting resistor and connected through a 4-pin header interface.




| Component | Quantity |
|---|---|
| Red LED | 1 |
| Yellow LED | 1 |
| Green LED | 1 |
| 220 Ω Resistor | 3 |
| 1×4 Header Connector | 1 |
.kicad_pcb).kicad_sch).kicad_pro)Tejwin Linto
Electrical and Electronics Engineering Student
Traffic-Light-LED-Module-PCB
│
├── README.md
├── LICENSE
│
└── KiCad
├── traffic light module.kicad_pcb.kicad_pcb
├── traffic light module.kicad_pro.kicad_pro
├── traffic light module.kicad_sch.kicad_sch
├── pcb-layout.png
├── pcb-3d-view.png
├── pcb-3d-view components.png
└── schematic.pngThis project is licensed under the MIT License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 220 ohm | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 3 | LED | LED_THT:LED_D10.0mm | D_green1, D_red1, D_yellow1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 20 × 85.5 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tejwin-linto-ee/Traffic-Light-LED-Module-PCB repository on GitHub, at the commit this page was made from: the board is KiCad/traffic light module.kicad_pcb.kicad_pcb and its schematic KiCad/traffic light module.kicad_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).