

Lc bpf
Miscellaneous RF front-end circuits
- Size
- 81.3 × 35.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 6
- Pads
- 70
- Tracks, vias
- 46, 376
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Oct 2019
- Updated
- 28 Dec 2020
Overview
Lc bpf is an open-source printed circuit board by tejeez, from the tejeez/rf-frontends repository on GitHub, published under the MIT licence. It is a 2-layer board of 81.3 × 35.6 mm with 23 parts on 6 nets, routed with 46 tracks and 376 vias.
Its parts include 10 capacitors, 5 inductors, 2 diodes and 2 connectors.
README
README.mdMiscellaneous RF front-end circuits
Here are the KiCad files for some RF amplifier PCB designs.
Unless otherwise specified, the designs here are under the MIT license.
wififem
This is a 2.4 GHz TX and RX amplifier using a SE2611T WiFi front-end chip. It is intended to go between a LimeSDR and an antenna or a higher-powered WiFi booster amplifier.
It also includes TX/RX switching controlled by a power detector.
SE2611T was chosen because Tommi OH1GJV had several of them as surplus. The design hasn't been tested though, since the components and boards got lost somewhere.
70cm_2W_PA
This is a 400-440 MHz power amplifier using a M68710L RF power module. The module is old but they were really cheap at Lutikoiden tuuletus. With a nominal input power of 20 mW (13 dBm), it can be driven directly from common SDRs.
It is designed to be mounted on a heatsink, transferring heat through the PCB using a grid of vias under the amplifier module. This avoids the mechanical trouble of achieving a good RF contact between the PCB and the heatsink. At low duty cycles, it may even work without a heatsink.
Note that the PCB is 1 mm thick.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | C | lc_bpf:C | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 5 | L | lc_bpf:L | L1, L2, L3, L4, L5 |
| 4 | ~ | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | D_x2_Serial_AKC | Package_TO_SOT_SMD:SOT-23_Handsoldering | D1, D2 |
| 2 | ~ | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J1, J2 |
More from tejeez/rf-frontends
2- 2 layers48.3 × 48.3 mm

- 2 layers40 × 49.5 mm

Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the Lc bpf PCB?
It measures 81.3 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lc bpf use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lc bpf KiCad files?
From the tejeez/rf-frontends repository on GitHub, at the commit this page was made from: the board is lc_bpf/lc_bpf.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lc bpf design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).