

Smd cart 2m 29f800
ROM Cartridge for Sega MegaDrive (Genesis)
- Size
- 83.8 × 49 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 79
- Pads
- 282
- Tracks, vias
- 1,504, 156
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Nov 2017
- Updated
- 28 Jun 2021
Overview
Smd cart 2m 29f800 is an open-source printed circuit board by tehKaiN, from the tehKaiN/smdCart repository on GitHub, published under the MPL-2.0 licence. It is a 2-layer board of 83.8 × 49 mm with 20 parts on 79 nets, routed with 1,504 tracks and 156 vias.
It is built around the 74LVC1G19GW. Its parts include 6 capacitors, 6 ICs, 4 resistors and 1 connector. It belongs with the retro computing and games boards of this library.
Main components
1README
README.mdCustom Sega MegaDrive Cartridges
On this repo you will find schematics for SMD carts of various memory size. Each directory is dedicated to cart of given size.
Current carts
512k- 512 KByte cart based on 27c4001 chip. Home-etching friendly PCB design. Not tested!1m_29f800- 1 MByte cart based on 29f800 chip. Erasable/programmable using ROMprg project.2m_29f800- Untested! 1-2 MByte cart based on 1-2 29f800 chips. Erasable/programmable using ROMprg project.
PCB Ordering instructions
MegaDrive carts have thickness of 1.6mm.
Creating new cart
When designing PCBs for new cart, the most safe way to get proper dimensions is to copy them from other carts. Some notes:
- maximum cart height is about 60mm, otherwise it won't fit the case;
- distance between mechanical holes is 70mm
- mechanical holes should have diameter of about 6,75mm - add about 1mm for electroplating.
- there should be no soldermask around edge connector pins.
After creating new design and checking if it works, you are encouraged to submit pull request to this repo with your design.
License
I dunno if MPL2.0 fits hardware, but the idea is that you should share your modifications of schematics / board layout.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | 1pin | Connect:1pin | DRL1, DRL2 |
| 2 | 29f800-SOP44 | megadrive:SOIC-44 | U4, U6 |
| 2 | 29f800-TSOP48 | megadrive:TSOP-I-48_18.4x12mm_P0.5mm | U3, U5 |
| 2 | 74LVC1G19 | Package_TO_SOT_SMD:SOT-23-6 | U1, U2 |
| 1 | smd_cart_connector_edge | megadrive:md_cart_edge_conn | CON1 |
The 19 most common of 20 parts.
More from tehKaiN/smdCart
3- 2 layers83.8 × 40 mm

- 2 layers83.8 × 49 mm

- 2 layers83.8 × 49 mm

Similar boards
- 2 layers80 × 140 mm

- 4 layers41.4 × 77.8 mm

- 2 layers22.9 × 54.6 mm

- 4 layers40 × 40 mm

CommsRev0
Kmshanley/PicoSat-Initiative
The pocket cube standard requires satellites to be 5x5x5cm and under 250 grams. Upon completion of this Wentworth PicoSat it will become one of the smallest satellites capable of high resolution imagery from LEO.
39 parts3GPL-3.0 - 4 layers100 × 100 mm

- 6 layers160 × 70 mm

- 4 layers120 × 75 mm

- 2 layers66.9 × 74.5 mm

Questions
How big is the Smd cart 2m 29f800 PCB?
It measures 83.8 × 49 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Smd cart 2m 29f800 use?
20 parts, built around the 74LVC1G19GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Smd cart 2m 29f800 KiCad files?
From the tehKaiN/smdCart repository on GitHub, at the commit this page was made from: the board is 2m_29f800/smd_cart_2m_29f800.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Smd cart 2m 29f800 design in my own project?
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).