2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers10 × 15 mm
Sensor Board
techy-robot/CACKLE-Expansion-Sensor_BoardThis is a connector breakout board for vertical mezzanine connectors on a hub. It has one Qwiic connector, two nanoSPI connectors, and header breakouts for the free pins, chip select pins, and the SPI pins.
- Size
- 10 × 15 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 14
- Pads
- 72
- Tracks, vias
- 134, 16
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Nov 2025
- Updated
- 14 Jul 2026
Overview
Sensor Board is an open-source printed circuit board by techy-robot, from the techy-robot/CACKLE-Expansion-Sensor_Board repository on GitHub. It is a 2-layer board of 10 × 15 mm with 12 parts on 14 nets, routed with 134 tracks and 16 vias.
Its parts include 6 connectors and 2 resistors. It belongs with the sensors and measurement boards of this library.
README
README.mdmodified: 2025-11-07T22:07:23-07:00
Sensor Board
[!TIP] This board is part of a larger modular control board ecosystem, CACKLE
This is a connector breakout board for vertical mezzanine connectors on a hub. It has one Qwiic connector, two nanoSPI connectors, and header breakouts for the free pins, chip select pins, and the SPI pins. Essentially it breaks out every pin accessible via the mezzanine connector.
Note that this does not fit the hubs by default because it sticks into the hub chaining headers. You will need a Vertical Spacer, or use the 2 connector sensor breakout instead, which does fit.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | 7 pin FPC 0.3mm Panasonic Y3b | custom_Interface_HID:fpc_7pin_0.3mm_connector Panasonic | J2, J5 |
| 1 | CS1 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | CS2 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | JST SH | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J7 |
| 1 | RS485+ | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | RS485- | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | SPI | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J1 |
| 1 | TE 3-2363962-0 Connector | custom_testpoints:TE_mezzanine_conn_3-2363962-0 | J15 |
| 1 | free pins | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J3 |
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
How big is the Sensor Board PCB?
It measures 10 × 15 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor Board use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor Board KiCad files?
From the techy-robot/CACKLE-Expansion-Sensor_Board repository on GitHub, at the commit this page was made from: the board is Sensor Board.kicad_pcb and its schematic Sensor Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask techy-robot before reusing the design.