
Esp
technoparrot01/indicatron
Clock with 400 seven-segment indicators, RTC and Wi-Fi support

Clock with 400 seven-segment indicators, RTC and Wi-Fi support
Wtf clock is an open-source printed circuit board by technoparrot01, from the technoparrot01/indicatron repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 330 × 112.3 mm with 309 parts on 905 nets, routed with 6,132 tracks and 662 vias.
Its parts include 100 capacitors, 50 resistors, 50 ICs and 1 connector. It belongs with the lEDs and displays boards of this library.
Display/Clock with 100 4bit seven-segment 0.28 Inch indicators, RTC and Wi-Fi support.
Project is separated into two PCBs for modular design.
Requires a 9–12V / 5A power supply.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 100 | ~ | Display_7Segment:7seg_4D_0_28inch | HL1, HL2, HL10, HL11, HL12, HL13, HL14, HL15, HL16, HL17, HL18, HL19, HL20, HL21, HL22, HL100 +84 |
| 50 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C11, C13, C15, C17, C19, C21, C23, C25, C27, C29, C31, C33, C35, C37 +34 |
| 50 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +34 |
| 50 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C10, C12, C14, C16, C18, C20, C22, C24, C26, C28, C30, C32, C34, C36, C100 +34 |
| 50 | MAX7221xWG | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U1, U2, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23 +34 |
| 8 | ~ | spacers:9774030243R | M1, M2, M3, M4, M5, M6, M7, M8 |
| 1 | 2023960407 | footprints.pretty2:CON_2023960407 | J1 |

technoparrot01/indicatron
Clock with 400 seven-segment indicators, RTC and Wi-Fi support

KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.



torlye/pocket-reform
My muscle memory requires me to have the Ctrl key at the bottom left corner of the keyboard!

FulongLi/AIPE-PCB-Agent
AIPE-PCB-Agent is the PCB design automation of the AIPE power-electronics ecosystem. Python generators turn a requirement file set (specification, insulation table, components, interfaces, floorplan and routing inputs)…



OpenElectronicsLab/OpenHardwareExG_Shield
Arduino shield OpenHardwareExG
It measures 330 × 112.3 mm and has 4 copper layers, 1.62 mm thick.
309 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the technoparrot01/indicatron repository on GitHub, at the commit this page was made from: the board is pcb/clock/wtf_clock.kicad_pcb and its schematic pcb/clock/indicator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).