2 layers81.8 × 91.5 mm
2 layers105 × 89 mm
Zendrive
tdarlic/ZendriveZendrive guitar pedal
- Size
- 105 × 89 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 27
- Pads
- 98
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 7 Jan 2015
- Updated
- 10 Jan 2015
Overview
Zendrive is an open-source printed circuit board by tdarlic, from the tdarlic/Zendrive repository on GitHub. It is a 2-layer board of 105 × 89 mm with 32 parts on 27 nets.
It is built around the OPA2604AP and BAT41. Its parts include 9 resistors, 7 capacitors, 4 diodes, 3 connectors and 2 transistors. It belongs with the audio and music boards of this library.
Main components
2
OPA2604AP
DIP-8-24V~-4.5V、4.5V~24V -40℃~+85℃ 1 10.5mA 100dB 11nV/√Hz@1kHz 1mV 20MHz 25V/us 3pA 50pA 8uV/℃ Built-in compensation DIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input Amplifiers
BAT41
DO-35-65℃~+125℃ 1 Independent 100V 100mA 100nA@50V 400mV@1mA 750mA DO-35 Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistors_SMD:R_1206_HandSoldering | R1, R2, R4 |
| 3 | 1K | Resistors_SMD:R_1206_HandSoldering | R3, R7, R8 |
| 3 | BAT41 | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D1, D2, D3 |
| 2 | 2N7000 | Housings_TO-92:TO-92-Free-inline-narrow-oval | Q1, Q2 |
| 2 | 470nF | Capacitors_ThroughHole:Capacitor7.5MMDiscRM5 | C3, C6 |
| 1 | 100K | Local:POT_HEADER_3 | RV-VOLUME-4 |
| 1 | 100nF | Capacitors_ThroughHole:Capacitor7.5MMDiscRM5 | C5 |
| 1 | 100pF | Capacitors_ThroughHole:Capacitor7.5MMDiscRM5 | C7 |
| 1 | 100uF | Capacitors_SMD:c_elec_6.3x5.3 | C1 |
| 1 | 10K | Local:POT_HEADER_3 | RV-VOICE-1 |
| 1 | 2M | Resistors_SMD:R_1206_HandSoldering | R6 |
| 1 | 3.3nF | Capacitors_ThroughHole:Capacitor3MMDiscRM2.5 | C4 |
| 1 | 3PDT | zendrive:3PDT | SW1 |
| 1 | 470K | Resistors_SMD:R_1206_HandSoldering | R5 |
| 1 | 470R | Resistors_SMD:R_1206_HandSoldering | R9 |
| 1 | 47uF | Capacitors_SMD:c_elec_5x5.3 | C2 |
| 1 | 500K | Local:POT_HEADER_3 | RV-GAIN-2 |
| 1 | 50K | Local:POT_HEADER_3 | RV-TONE-3 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | BATTERY | Pin_Headers:Pin_Header_Angled_1x02 | BT1 |
| 1 | JACK_INPUT | Local:NRJ6HF_6MM_ST_JACK | J1 |
| 1 | JACK_OUTPUT | Local:NRJ6HF_6MM_ST_JACK | J2 |
| 1 | LED | Diodes_ThroughHole:Diode_LED_5mm_round_vertical | D4 |
| 1 | OPA2604 | Sockets_DIP:DIP-8__300_ELL | U1 |
Questions
How big is the Zendrive PCB?
It measures 105 × 89 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zendrive use?
32 parts, built around the OPA2604AP and BAT41. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zendrive KiCad files?
From the tdarlic/Zendrive repository on GitHub, at the commit this page was made from: the board is zendrive.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zendrive design in my own project?
Its repository states no licence, so its author keeps all rights: ask tdarlic before reusing the design.
Similar boards
- 2 layers
- 2 layers52 × 63 mm
TOP
Chrismettal/PedalDev
Complete audio effect stompbox ecosystem and collection of designs
100 parts11 - 2 layers81.9 × 44.5 mm
- 2 layers30 × 128.5 mm
Kwantizer
benjiaomodular/Kwantizer
[WIP] An Arduino-based CV quantizer for Eurorack modular synthesizers
32 parts7 - 2 layers155.1 × 156 mm
- 2 layers100 × 100 mm
Airlock Mainboard
openlab-aux/airlock
This repository contains various soft- and hardware sources for the OpenLab Augsburg Airlock.
79 parts4 - 2 layers54 × 31 mm
