2 layers66.9 × 74.5 mm
2 layers69.1 × 53.8 mm
Gauss meter hw
Taur-Tech/gauss_meter1Simple Gauss Meter
- Size
- 69.1 × 53.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 36
- Pads
- 78
- Tracks, vias
- 97, 209
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Aug 2019
- Updated
- 8 Sep 2019
Overview
Gauss meter hw is an open-source printed circuit board by Taur-Tech, from the Taur-Tech/gauss_meter repository on GitHub. It is a 2-layer board of 69.1 × 53.8 mm with 20 parts on 36 nets, routed with 97 tracks and 209 vias.
Its parts include 5 capacitors, 5 resistors, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Potentiometer_SMD:Potentiometer_Bourns_3214X_Vertical | RV1, RV2 |
| 2 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 1 | 128x64 - SSH1106 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 470p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 47p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | Arduino_UNO_R2 | Module:Arduino_UNO_R2_WithMountingHoles | A1 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | INA326 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U1 |
The 16 most common of 20 parts.
Questions
How big is the Gauss meter hw PCB?
It measures 69.1 × 53.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gauss meter hw use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gauss meter hw KiCad files?
From the Taur-Tech/gauss_meter repository on GitHub, at the commit this page was made from: the board is gauss_meter_hw/gauss_meter_hw.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gauss meter hw design in my own project?
Its repository states no licence, so its author keeps all rights: ask Taur-Tech before reusing the design.
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772