
StepTracker
PCB design to run the Wearable Health Tracker firmware project.
- Size
- 28.3 × 28.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 80
- Pads
- 207
- Tracks, vias
- 273, 39
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 21 Apr 2026
- Updated
- 20 May 2026
Overview
StepTracker is an open-source printed circuit board by tas-miley, from the tas-miley/PCB-Wearable-Health-Tracker repository on GitHub. It is a 2-layer board of 28.3 × 28.5 mm with 42 parts on 80 nets, routed with 273 tracks and 39 vias.
It is built around the MDBT50Q-512K, MAX30102 and BQ24079RGT, with the H5VU10U and USB-TYPE-C-008 among its other parts. Its parts include 16 capacitors, 13 resistors, 6 ICs, 3 diodes and 3 connectors. It belongs with the power boards and the nRF52 and nRF5x boards of this library.
Main components
5MDBT50Q-512K
SMD-61P加密功能、Mesh组网 SMD-61P Bluetooth Modules ROHSRAYTACBluetooth ModulesMAX30102
-Integrated ambient light cancellation (ALC)、Built-in temperature sensor、With proximity detection function - Heart Rate Sensors ROHSAnalog DevicesHeart Rate SensorsBQ24079RGT
QFN-16-EP(3x3)-40℃~+125℃ 1.5A 4.1V 4.35V~6.6V 6.5uA Charging IC Lithium Battery Support QFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementH5VU10U
DFN1006-2LESD And Surge Protection (TVS/ESD)hongjiachengUSB-TYPE-C-008
SMD-25℃~+85℃ 1 10000 times 5A 5V 6.8mm 6P Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSDEALONUSB Connectors
README
README.mdPCB-Wearable-Health-Tracker
PCB design to run the firmware for the Wearable Health Tracker project. The goal of this PCB is to support SPO2 and IMU sensors, BLE communication, and LiPo battery power/charging. It's also designed to be ~1 inch x 1 inch to support wrist wearability.
Completed:
- Component selection (Max30102, LSM6DSOX, nRF52833, voltage regulators)
- Battery Selection (LiPo 150mAh)
- Connector choice (USB-C for charging, battery connector, Tag Connect for programming)
- Initial 2 layer trace layout
Todo:
- Move from 2 layer to 4 layer board, with GND and PWR planes
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1 uF | PCM_JLCPCB:C_0402 | C1, C2, C8, C11, C12 |
| 5 | 1k | PCM_JLCPCB:R_0402 | R5, R10, R11, R12, R13 |
| 4 | 10 uF | PCM_JLCPCB:C_0402 | C5, C6, C7, C15 |
| 3 | 4.7 uF | PCM_JLCPCB:C_0402 | C9, C10, C13 |
| 2 | 0.1 uF | PCM_JLCPCB:C_0402 | C14, C16 |
| 2 | 12 pF | PCM_JLCPCB:C_0402 | C3, C4 |
| 2 | 4.7k | PCM_JLCPCB:R_0402 | R1, R2 |
| 2 | 5.1k | PCM_JLCPCB:R_0402 | R3, R4 |
| 2 | Green | PCM_JLCPCB:D_0805 | D2, D3 |
| 1 | 1.18k | PCM_JLCPCB:R_0402 | R7 |
| 1 | 10k | PCM_JLCPCB:R_0402 | R9 |
| 1 | 22k | PCM_JLCPCB:R_0402 | R8 |
| 1 | 6.2k | PCM_JLCPCB:R_0402 | R6 |
| 1 | BQ24079RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U6 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J1 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 1 | Crystal | StepTrackerFootprints:Crystal_3131M | Y1 |
| 1 | H5VU10U | PCM_JLCPCB:D_DFN1006-2L | D1 |
| 1 | LSM6DSOXTR | StepTrackerFootprints:LSM6DSOX | U3 |
| 1 | MAX30102 | OptoDevice:Maxim_OLGA-14_3.3x5.6mm_P0.8mm | U4 |
| 1 | MDBT50Q-512K | RF_Module:Raytac_MDBT50Q | U1 |
| 1 | TLV70018_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | TLV70033_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB-TYPE-C-008 | StepTrackerFootprints:USB-C-SMD_TYPE-602-T3 | J2 |
Similar boards
- 2 layers45 × 42.8 mm

- 4 layers70 × 50 mm

Motor power poc
Galacs/motor-power-poc
A POC PCB to test circuit electrical protections and motor control schemes
165 parts - 4 layers29 × 42 mm

Rollxoxo shim
Galacs/rollxoxo-shim
Shim pcb to allow remote control of rollxio garage door via wifi or bluetooth
72 parts - 2 layers307.2 × 80.4 mm

- 2 layers82.6 × 94.6 mm

- 2 layers85.5 × 70 mm

V0-Replay-26 PCB A
temporal-community/badge.temporal.io
Open-source firmware, hardware files, docs, and community app registry for the Temporal Replay 2026 Badge.
211 parts8MIT - 4 layers82 × 70 mm

Temporal Badge CHARLIE
Architeuthis-Flux/Temporal-Replay-26-Badge
Community firmware for the Temporal Replay 26 badge
208 parts5Unlicense - 2 layers76.5 × 76.5 mm

Questions
How big is the StepTracker PCB?
It measures 28.3 × 28.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the StepTracker use?
42 parts, built around the MDBT50Q-512K, MAX30102, BQ24079RGT and H5VU10U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the StepTracker KiCad files?
From the tas-miley/PCB-Wearable-Health-Tracker repository on GitHub, at the commit this page was made from: the board is StepTracker.kicad_pcb and its schematic StepTracker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the StepTracker design in my own project?
Its repository states no licence, so its author keeps all rights: ask tas-miley before reusing the design.