

Gpstracker
Diseño del circuito esquemático y circuito impreso del seguidor GPS. Desarrollado en KiCad.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 43
- Pads
- 68
- Tracks, vias
- 72, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Dec 2016
- Updated
- 6 Dec 2016
Overview
Gpstracker is an open-source printed circuit board by taller-de-proyecto-2, from the taller-de-proyecto-2/hardware repository on GitHub. It is a 2-layer board with 13 parts on 43 nets, routed with 72 tracks and 0 vias.
It is built around the CD40106. Its parts include 5 diodes, 4 resistors, 1 IC and 1 connector. It belongs with the ESP8266 boards of this library.
Main components
1Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2, R3, R4 |
| 3 | LED | LEDs:LED-5MM | D3, D4, D5 |
| 2 | D | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D1, D2 |
| 1 | CD40106 | Housings_DIP:DIP-14_W7.62mm | CD1 |
| 1 | CONN_2_V | borniers:bornier2_V | P1 |
| 1 | NodeMCU_Amica_R2 | NodeMCU:NodeMCU_Amica_R2 | U2 |
| 1 | uBloxNeo6m | Pin_Headers:Pin_Header_Straight_1x04 | GPS1 |
Similar boards
- 2 layers65 × 100 mm

- 2 layers65 × 106.5 mm

- 2 layers30 × 59.9 mm

Esp32-wled level shifter
michd/esp32-wled-level-shifter
PCB connecting ESP32 dev board and level shifter for hookup to 5V APA102 LED strip
70 parts6 - 2 layers100 × 100 mm

- 2 layers39.2 × 110 mm

- 2 layers101.6 × 76.2 mm

- 2 layers182.9 × 114.3 mm

- 2 layers40 × 20 mm

Questions
What parts does the Gpstracker use?
13 parts, built around the CD40106. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gpstracker KiCad files?
From the taller-de-proyecto-2/hardware repository on GitHub, at the commit this page was made from: the board is gpstracker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gpstracker design in my own project?
Its repository states no licence, so its author keeps all rights: ask taller-de-proyecto-2 before reusing the design.