
Usb typec serial insulation adum1412
takurx/pcb_usb_typec_serial_insulation
This is pcb, usb type-c serial insulation

This is pcb, usb type-c serial insulation
Usb typec serial insulation is an open-source printed circuit board by takurx, from the takurx/pcb_usb_typec_serial_insulation repository on GitHub, published under the MIT licence. It is a 2-layer board of 20 × 17 mm with 5 parts on 12 nets, routed with 31 tracks and 4 vias.
Its parts include 2 capacitors, 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
This is pcb, usb type-c serial insulation
This folder contains the KiCad project files for a USB Type-C serial insulation board using the ADUM1412 digital isolator chip. The project includes schematic files, PCB layout files, and a complete set of Gerber manufacturing files in the gerber subdirectory. This design provides galvanic isolation for serial communication through USB Type-C connections.
This folder contains the KiCad project files for a USB Type-C serial insulation board using the ADUM121N digital isolator chip. Similar to the ADUM1412 version, it includes complete schematic, PCB layout, and Gerber manufacturing files. This alternative design uses a different isolator IC to achieve serial communication isolation through USB Type-C.
このフォルダには、ADUM1412デジタルアイソレータチップを使用したUSB Type-Cシリアル絶縁基板のKiCadプロジェクトファイルが含まれています。プロジェクトには、回路図ファイル、PCBレイアウトファイル、およびgerberサブディレクトリ内の完全なガーバー製造ファイルセットが含まれています。この設計は、USB Type-C接続を介したシリアル通信のガルバニック絶縁を提供します。
このフォルダには、ADUM121Nデジタルアイソレータチップを使用したUSB Type-Cシリアル絶縁基板のKiCadプロジェクトファイルが含まれています。ADUM1412バージョンと同様に、完全な回路図、PCBレイアウト、およびガーバー製造ファイルが含まれています。この代替設計では、異なるアイソレータICを使用して、USB Type-Cを介したシリアル通信の絶縁を実現しています。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF,10V(=5V*2) | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1, J2 |
| 1 | ADuM121N | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |

takurx/pcb_usb_typec_serial_insulation
This is pcb, usb type-c serial insulation


joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
It measures 20 × 17 mm and has 2 copper layers, 1.6 mm thick.
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the takurx/pcb_usb_typec_serial_insulation repository on GitHub, at the commit this page was made from: the board is usb_typec_serial_insulation_adum121n/usb_typec_serial_insulation.kicad_pcb and its schematic usb_typec_serial_insulation_adum121n/usb_typec_serial_insulation.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).