
Tag breakout l432-u375-lipo v1
tag-designs/hardware
Hardware designs for tags and bases

Hardware designs for tags and bases
UIUCTag is an open-source printed circuit board by tag-designs, from the tag-designs/hardware repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 19 × 10 mm with 27 parts on 45 nets, routed with 290 tracks and 35 vias.
It is built around the AT25FF321A-UUN-T, BMP585 and RV-3028-C8-32.768KHZ-1PPM-TA-QC, with the ADXL362BCCZ-RL, GRM033R61A104ME15D and 04026D226MAT2A among its other parts. Its parts include 12 capacitors, 6 connectors, 5 ICs, 2 resistors and 1 diode. It belongs with the STM32 boards of this library.
Board and mechanical designs for the ultralight archival data loggers (tags) documented at https://tag-designs.github.io/.
| Path | Holds |
|---|---|
BoardDesigns/ | KiCad schematics and layouts for the tags and base boards, with their KiBot fabrication configurations |
Mechanical/ | OpenSCAD sources for cases, carriers and harness jigs |
docs/ | The hardware documentation site, published at https://tag-designs.github.io/hardware/ |
STM32_open_pin_data | ST's pin-data submodule, used by the design-rule helpers |
Board designs reach the shared symbol and footprint libraries through
${KIPRJMOD}/../../, so a board is tied to its depth in the directory tree.
Moving one between directories is more than a move.
The documentation's board renders and schematic PDFs are generated from the KiCad files and committed, because the workflow that publishes the site has no KiCad in it. After editing a board:
cmake -S BoardDesigns -B build-boards
cmake --build build-boards --target board-docsBoardDesigns/REGENERATING.md covers the
targets, the three checks that guard the figures, what each of their messages
means, and why generation is not done in CI. Read it before chasing a render
that looks wrong — in particular, kicad-cli reports nothing at all when it
cannot find a 3D model.
Copyright © 2018–2026 The Trustees of Indiana University.
This source describes Open Hardware and is licensed under the CERN Open
Hardware Licence Version 2 — Permissive (CERN-OHL-P-2.0). You may
redistribute and modify this source and make products using it under the terms
of that licence, whose full text is in LICENSE and at
https://ohwr.org/cern_ohl_p_v2.txt.
This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the licence for applicable conditions.
The STM32_open_pin_data submodule is ST's and carries its own license. The
software that runs on these boards lives in a separate repository under the MIT
License; see the
project licensing summary.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uf | Capacitor_SMD:C_0201_0603Metric | C1, C2, C3, C5, C7, C501, C502, C503, C504 |
| 4 | Conn_01x01 | AccelTag:taghole1.1mm | J301, J302, J303, J304 |
| 2 | 22uf | Capacitor_SMD:C_0402_1005Metric | C4, C404 |
| 1 | 10 | AccelTag:R_0201_0603Metric | R2 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 47uf | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 724-AT25FF321A-UUN-T | AccelTag:adesto_wlcsp12 | U1 |
| 1 | BMP585 | libraries:LGA9_BMP585_BOS | U3 |
| 1 | CONN_01X02 | AccelTag:MS621 | J401 |
| 1 | CONN_02X04 | AccelTag:tagpoints6 | J201 |
| 1 | D | Diode_SMD:D_0402_1005Metric | D401 |
| 1 | PMBT2222AMBYL | Package_TO_SOT_SMD:SOT-883 | Q501 |
| 1 | RV-3028-C8-32.768kHz-1PPM-TA-QC | libraries:RV-3028-C8 | U501 |
| 1 | STM32L432KCU6TR | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U302 |
| 1 | adxl362 | libraries:ADXL362 | U2 |

tag-designs/hardware
Hardware designs for tags and bases

tag-designs/hardware
Hardware designs for tags and bases

tag-designs/hardware
Hardware designs for tags and bases









tag-designs/hardware
Hardware designs for tags and bases

GMUCERG/fobos
Flexible Open-source workBench fOr Side-channel analysis (FOBOS)

Maritime-Hacking-Village/Badge-2025
Public repository for the official MHV 2025 badge.





MatthiasGeorgImhof/STMF405_Flight_Controller
A flight controller inspired by Speedybee F405 v3 but with CAN and flash memory instead of flash card.

MatthiasGeorgImhof/STMF765_Flight_Controller
A flight controller inspired by Speedybee F405 v3 but with CAN using F7 MCU. Use flash memory instead of flash card.
It measures 19 × 10 mm and has 4 copper layers, 0.4 mm thick.
27 parts, built around the AT25FF321A-UUN-T, BMP585, RV-3028-C8-32.768KHZ-1PPM-TA-QC and ADXL362BCCZ-RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tag-designs/hardware repository on GitHub, at the commit this page was made from: the board is BoardDesigns/Tags/UIUCTag/UIUCTag.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).