
Tag breakout l432-u375-lipo v1
tag-designs/hardware
Hardware designs for tags and bases

Hardware designs for tags and bases
BaseConnetorPower is an open-source printed circuit board by tag-designs, from the tag-designs/hardware repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 36.5 × 33 mm with 2 parts on 6 nets, routed with 29 tracks and 2 vias.
Board and mechanical designs for the ultralight archival data loggers (tags) documented at https://tag-designs.github.io/.
| Path | Holds |
|---|---|
BoardDesigns/ | KiCad schematics and layouts for the tags and base boards, with their KiBot fabrication configurations |
Mechanical/ | OpenSCAD sources for cases, carriers and harness jigs |
docs/ | The hardware documentation site, published at https://tag-designs.github.io/hardware/ |
STM32_open_pin_data | ST's pin-data submodule, used by the design-rule helpers |
Board designs reach the shared symbol and footprint libraries through
${KIPRJMOD}/../../, so a board is tied to its depth in the directory tree.
Moving one between directories is more than a move.
The documentation's board renders and schematic PDFs are generated from the KiCad files and committed, because the workflow that publishes the site has no KiCad in it. After editing a board:
cmake -S BoardDesigns -B build-boards
cmake --build build-boards --target board-docsBoardDesigns/REGENERATING.md covers the
targets, the three checks that guard the figures, what each of their messages
means, and why generation is not done in CI. Read it before chasing a render
that looks wrong — in particular, kicad-cli reports nothing at all when it
cannot find a 3D model.
Copyright © 2018–2026 The Trustees of Indiana University.
This source describes Open Hardware and is licensed under the CERN Open
Hardware Licence Version 2 — Permissive (CERN-OHL-P-2.0). You may
redistribute and modify this source and make products using it under the terms
of that licence, whose full text is in LICENSE and at
https://ohwr.org/cern_ohl_p_v2.txt.
This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the licence for applicable conditions.
The STM32_open_pin_data submodule is ST's and carries its own license. The
software that runs on these boards lives in a separate repository under the MIT
License; see the
project licensing summary.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Tagbase | MultiCharger:6pin_tagpoints_new_offset | J103 |

tag-designs/hardware
Hardware designs for tags and bases

tag-designs/hardware
Hardware designs for tags and bases

tag-designs/hardware
Hardware designs for tags and bases









tag-designs/hardware
Hardware designs for tags and bases

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 36.5 × 33 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tag-designs/hardware repository on GitHub, at the commit this page was made from: the board is BoardDesigns/Obsolete/BaseConnetorPower/BaseConnetorPower.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).