
CollabJam
TactileVision/CollabJam-PCB
This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).

This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).
CollabJam is an open-source printed circuit board by TactileVision, from the TactileVision/CollabJam-PCB repository on GitHub. It is a 2-layer board of 44 × 51.9 mm with 45 parts on 46 nets, routed with 265 tracks and 85 vias.
It is built around the DA7281-00FVC. Its parts include 13 resistors, 6 capacitors, 6 ICs, 1 diode and 1 connector. It belongs with the interfaces and adapters boards of this library.
This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).

Below are links to the individual repositories associated with the project:
If you use this project in your research, please cite it as follows:
@inproceedings{Wittchen2025CollabJam,
author = {Wittchen, Dennis and Ramian, Alexander and Sabnis, Nihar and Chlebowski, Christopher and Böhme, Richard and Freitag, Georg and Fruchard, Bruno and Degraen, Donald},
title = {CollabJam: Studying Collaborative Haptic Experience Design for On-Body Vibrotactile Patterns},
year = {2025},
publisher = {Association for Computing Machinery},
address = {New York, NY, USA},
booktitle = {Proceedings of the 2025 CHI Conference on Human Factors in Computing Systems},
location = {Yokohama, Japan},
series = {CHI '25},
doi = {10.1145/3706598.3713469}
}| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R6, R7, R9, R10, R12, R13 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6 |
| 4 | 5k6 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5, R8, R11 |
| 4 | DA7281-00FVC | collabjam:QFN65P300X300X84-12N | IC2, IC3, IC4, IC5 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H1, H2, H2 |
| 4 | Trim | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1, RV2, RV3, RV4 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 150 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | JST A1 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | A1 |
| 1 | JST A2 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | A2 |
| 1 | JST A3 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | A3 |
| 1 | JST A4 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | A4 |
| 1 | LED | collabjam:LTSTS220KFKT | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | M1 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | M1 |
| 1 | M2 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | M2 |
| 1 | M3 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | M3 |
| 1 | M4 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | M4 |
| 1 | SIP32510DT-T1-GE3 | collabjam:SOT95P284X110-6N | IC1 |
| 1 | VBUS | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | power switch | collabjam:450404015514 | S1 |
| 1 | ~ | collabjam:STAMP-S3-SMD | U2 |

TactileVision/CollabJam-PCB
This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).

TactileVision/CollabJam-PCB
This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).

TactileVision/CollabJam-PCB
This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).


imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro


makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!


peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project

tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

It measures 44 × 51.9 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the DA7281-00FVC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TactileVision/CollabJam-PCB repository on GitHub, at the commit this page was made from: the board is v3/CollabJam.kicad_pcb and its schematic v1/CollabJam.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TactileVision before reusing the design.