
CollabJam
TactileVision/CollabJam-PCB
This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).

This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).
CollabJam is an open-source printed circuit board by TactileVision, from the TactileVision/CollabJam-PCB repository on GitHub. It is a 2-layer board of 50 × 53 mm with 40 parts on 42 nets, routed with 288 tracks and 33 vias.
It is built around the DA7281-00FVC. Its parts include 13 resistors, 6 capacitors, 5 ICs, 2 connectors and 1 diode. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).

Below are links to the individual repositories associated with the project:
If you use this project in your research, please cite it as follows:
@inproceedings{Wittchen2025CollabJam,
author = {Wittchen, Dennis and Ramian, Alexander and Sabnis, Nihar and Chlebowski, Christopher and Böhme, Richard and Freitag, Georg and Fruchard, Bruno and Degraen, Donald},
title = {CollabJam: Studying Collaborative Haptic Experience Design for On-Body Vibrotactile Patterns},
year = {2025},
publisher = {Association for Computing Machinery},
address = {New York, NY, USA},
booktitle = {Proceedings of the 2025 CHI Conference on Human Factors in Computing Systems},
location = {Yokohama, Japan},
series = {CHI '25},
doi = {10.1145/3706598.3713469}
}| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R6, R7, R9, R10, R12, R13 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6 |
| 4 | 5k6 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5, R8, R11 |
| 4 | DA7281-00FVC | collabjam:QFN65P300X300X84-12N | IC2, IC3, IC4, IC5 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H2, H2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 450404015514 | collabjam:450404015514 | S1 |
| 1 | ESP32 left | Connector_PinSocket_2.54mm:PinSocket_1x13_P2.54mm_Vertical | J1 |
| 1 | ESP32 right | Connector_PinSocket_2.54mm:PinSocket_1x13_P2.54mm_Vertical | J2 |
| 1 | ESP_BAT_GND | TestPoint:TestPoint_Pad_2.0x2.0mm | - |
| 1 | ESP_BAT_PWR | TestPoint:TestPoint_Pad_2.0x2.0mm | + |
| 1 | LED | collabjam:LTSTS220KFKT | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | M1 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | M1 |
| 1 | M2 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | M2 |
| 1 | M3 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | M3 |
| 1 | M4 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | M4 |
| 1 | Power | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BAT |
| 1 | SIP32510DT-T1-GE3 | collabjam:SOT95P284X110-6N | IC1 |

TactileVision/CollabJam-PCB
This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).

TactileVision/CollabJam-PCB
This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).

TactileVision/CollabJam-PCB
This repository contains KiCAD projects for the tactile display Printed Circuit Board (PCB).


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 50 × 53 mm and has 2 copper layers, 1.6 mm thick.
40 parts, built around the DA7281-00FVC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TactileVision/CollabJam-PCB repository on GitHub, at the commit this page was made from: the board is v2/CollabJam.kicad_pcb and its schematic v1/CollabJam.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TactileVision before reusing the design.