Skip to the content
2 layers60 × 20 mmTwo layer, the printed circuit board in 3D

Nodetto standalone diagram editor: shared editor packages and Tauri desktop client

Size
60 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
4
Pads
10
Tracks, vias
12, 2
Pours
1
Routed
Yes
KiCad
KiCad 8 (file 20240108)
Created
23 Aug 2026
Updated
6 Nov 2026

Overview

Two layer is an open-source printed circuit board by tacogips, from the tacogips/nodetto-app repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 20 mm with 5 parts on 4 nets, routed with 12 tracks and 2 vias.

Its parts include 1 capacitor, 1 resistor, 1 IC and 1 connector.

README

test-fixtures/kicad/README.md

These small files are hand-written for nodetto importer tests. They contain no KiCad library, demo, or QA content and are licensed with this repository.

  • two-layer.kicad_pcb: self-authored KiCad 8 two-layer PCB fixture for Nodetto tests; not derived from any third-party board.
  • kicad5.kicad_pcb: self-authored KiCad 5 syntax fixture for Nodetto tests; not derived from any third-party board.

Parts

5
QtyValueFootprintReferences
1100nCapacitor_SMD:C_0603_1608MetricC1
11kResistor_SMD:R_0603_1608MetricR1
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1HeaderConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalU1
1MountingHoleMountingHole:MountingHole_3.2mmH1

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Two layer PCB?

It measures 60 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Two layer use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Two layer KiCad files?

From the tacogips/nodetto-app repository on GitHub, at the commit this page was made from: the board is test-fixtures/kicad/two-layer.kicad_pcb and its schematic test-fixtures/kicad/led-button.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Two layer design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).