
Scsi d25p50k adapter
tachesimazzoca/scsi-adapters
This repository contains PCB files for SCSI adapters.

This repository contains PCB files for SCSI adapters.
HDB50 External is an open-source printed circuit board by tachesimazzoca, from the tachesimazzoca/scsi-adapters repository on GitHub. It is a 2-layer board of 52.6 × 53.3 mm with 64 parts on 89 nets, routed with 1,110 tracks and 128 vias.
It is built around the 74HC14 and AMS1117-2.85. Its parts include 33 resistors, 16 capacitors, 7 ICs, 3 diodes and 1 connector.
This repository contains PCB files for SCSI adapters.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 110 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R10, R20, R21, R22, R24, R26, R33, R34, R35 +2 |
| 13 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R14, R15, R16, R17, R18, R19, R23, R25, R28, R29, R42 |
| 4 | 0.1uF | Local:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C5, C8, C11 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C9, C13, C14 |
| 3 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C15, C16 |
| 3 | LVT125 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U5, U6, U7 |
| 2 | 4.7uF | Local:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C12 |
| 2 | 47uF | Local:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3, C4 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3 |
| 2 | LVT245 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4, U9 |
| 1 | 100n | Local:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R56 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 5749084-5 | Local:TE_5749084_5 | J2 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | AMS1117-2.85 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | D | Diode_SMD:D_SMA | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MicroSD-TF-06 | Local:TF-06_MicroSD | SD2 |
| 1 | Pico_Footprint | Local:BluePillModule | RP1 |
| 1 | Polyfuse | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F2 |

tachesimazzoca/scsi-adapters
This repository contains PCB files for SCSI adapters.

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

daniel-ayers/BlueSCSI-v2
Snapshot of BlueSCSI/BlueSCSI-v2 for evidential purposes. Not updated.

hacklabkyiv/prismo-reader
RFID readers of Prismo access management system




keirf/pcb-projects
The old Kickstart switcher documentation is here.

anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.
It measures 52.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
64 parts, built around the 74HC14 and AMS1117-2.85. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tachesimazzoca/scsi-adapters repository on GitHub, at the commit this page was made from: the board is bluescsi/kicad/HDB50_External/HDB50_External.kicad_pcb and its schematic bluescsi/kicad/HDB50_External/HDB50_External.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tachesimazzoca before reusing the design.