Skip to the content
2 layersIRNoblex, the printed circuit board in 3D

Ingeniería inversa para controlar el A/C Noblex NOS32C13X

Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
6
Pads
9
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 4
Created
23 Dec 2015
Updated
29 Dec 2015

Overview

IRNoblex is an open-source printed circuit board by szaffarano, from the szaffarano/IRNoblex repository on GitHub. It is a 2-layer board with 4 parts on 6 nets.

Its parts include 2 resistors, 1 diode and 1 transistor.

README

README.md

Implementación IR para controlar A/C Noblex modelo NOS32C13X

Build Status

Es una versión preliminar, muy primitiva, deducida por ingeniería inversa analizando en osciloscopio y con un receiver TSOP48 en un Arduino. En un raspberry pi si bien se pueden capturar tramas, los tiempos son muy dispares dada la latencia del sistema operativo. No obtuve buenos resultados.

Protocolo

Nomenclatura

  • Cada bit que se envía está conformado por un primer pulso (mark) que es igual siempre, más un segundo pulso (space) que varía según se quiera enviar un uno o un cero.
  • Los valores de los pulsos son:
    • mark: 540 usec
    • space (cero): 520 usec
    • space (uno): 1580 usec
  • Cada secuencia de bytes que se envía está conformada por:
    • un header, compuesto por un pulso mark de 8660 usec y un pulso space de 4300 usec.
    • 64 bits de información, con sucesivos marks y spaces según lo dicho antes.
    • Un bit "separador" que consiste un pulso mark de 640 y un pulso space de 19240. Este separador se ubica en la posición 36 de la trama de 64 bits.
    • Cuatro bits que hacen las veces de checksum, calculado como la suma big endian de los 8 bytes precedentes interpretados también como big endian.
text
        +---+--------------+---+------------+-----+
        | H |   35 bits    |sep|   28 bits  | crc |
        +---+--------------+---+------------+-----+ 

Modo

El código se codifica con 3 bits en la posición [0:3] de la trama. El A/C maneja 5 modos distintos:

  • Auto: 000
  • Cool: 100
  • Dry: 010
  • Fan: 110
  • Heat: 001

Power

Es el 4 bit de la trama:

  • On: 1
  • Off: 0

Fan

Se maneja con 2 bits en la posición [4:5] de la trama:

  • Mínimo: 10
  • Medio: 01
  • Máximo: 11
  • Auto: 00

Swing

Se maneja con 2 bits. Pueden ser más, falta analizar los distintos casos ya que por lo visto depende el modo en el que esté para que haya valores válidos. En principió observé que se maneja con 2 bits separados, frame[5] y frame[36]

  • On: ambos en uno.
  • Off: ambos en cero.

Temperatura

Manejada por 4 bits en la posición [8:11] del frame. Se calcula como: TEMPERATURA - 16 y se expresa como big endian.

Luz

Se representa con un bit en frame[21].

  • On: 1
  • Off: 0

Bits invariantes / sin analizar

Solo una parte de los bits varían según la funcionalidad interpretada, el resto se mantiene invariante:

c
  uint8_t frame[8] = {
    0,    // mode[0:2], power[3], fan[4:5], swing[6], zero[7]
    0,    // temp[0:3], zero[4:7]
    0,    // ligth[5], zero[0:4], one[6], zero[7]
    0x0A, // fixed[0:7]
    0x50, // fixed[0:3], separator[3], swing[4]
    0x00, // fixed[0:7]
    0x40, // fixed[0:7]
    0x00  // fixed[0:7]
  };

Parts

4
QtyValueFootprintReferences
110KResistors_ThroughHole:Resistor_Horizontal_RM10mmR1
182Resistors_ThroughHole:Resistor_Horizontal_RM10mmR2
1LEDLEDs:LED-5MMD1
1Q_NPN_EBCTO_SOT_Packages_THT:TO-92_Inline_WideQ1

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

What parts does the IRNoblex use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IRNoblex KiCad files?

From the szaffarano/IRNoblex repository on GitHub, at the commit this page was made from: the board is schematic/ir.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the IRNoblex design in my own project?

Its repository states no licence, so its author keeps all rights: ask szaffarano before reusing the design.