

Bus Card
Yet another 8bit Retro Computer
- Size
- 350 × 107.9 mm
- Copper layers
- 4
- Thickness
- 2.61 mm
- Parts
- 132
- Nets
- 197
- Pads
- 2,346
- Tracks, vias
- 7,526, 752
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 May 2024
- Updated
- 26 Jul 2024
Overview
Bus Card is an open-source printed circuit board by Synthron, from the Synthron/S65 repository on GitHub. It is a 4-layer board of 350 × 107.9 mm with 132 parts on 197 nets, routed with 7,526 tracks and 752 vias.
It is built around the SA39-11EWA. Its parts include 48 resistors, 17 connectors, 14 ICs, 6 capacitors and 2 diodes. It belongs with the retro computing and games boards and the FPGA and CPLD boards of this library.
Main components
1README
README.mdS65xx Computer System
Yet another 8bit Retro Computer
Completely bloated, overkill and fully hackable!
ToDo
- Finish Hardware
- Software
- WozMon
- Implement Serial IO
- Implement Input Buffer
- extended for block write
- Kernel Functions
- General SysCalls
- Hardware Drivers
- RAM-Kernel
- Basic
- EhBasic
- File System
- Operating System
- WozMon
- Hardware
- order PCBs
- order parts
- solder together
Hardware
- Modules
- Backplane Bus
- CPU
- ROM
- RAM
- Bank/IRQ
- LCD/IRQ
- SIO
- PIO
- User Ports
- IDE
- Simple-IDE
- CF
- SID
- Addr + RTC + Clock
- Prototyping Board
- LPT Interface
- MyCPU Graphics Unit Interface
Software Brainstorm
- EhBasic
- maybe Microsoft Basic? See Ben Eater
- both in different banks
- maybe Microsoft Basic? See Ben Eater
- WozMon Main Boot
- Serial Program Bootloader
- File System (FAT?)
- DOS-Like UI
boot routine:
- selftest
- RAM Check
- ROM Check + version
- Load Kernel functions to RAM
- Start Monitor
Memory Map
General:
| Start | End | Usage | Size |
|---|---|---|---|
| 0000 | 7FFF | RAM | 32.768 |
| 8000 | BEFF | RAM Banked | 16.128 |
| BF00 | BFFF | IO Space | 256 |
| C000 | FFFF | ROM Banked | 16.384 |
IO Space:
| Start | End | Usage | Size |
|---|---|---|---|
| BF00 | BF07 | Bank & IRQ | 8 |
| BF08 | BF0F | TPI IDE | 8 |
| BF10 | BF12 | LPT | 2 |
| BF13 | BF14 | --- (LPT2) | 2 |
| BF14 | BF16 | MyCPU VGA | 3 |
| BF17 | BF1B | --- | 5 |
| BF1C | BF1F | PIA LEDs | 4 |
| BF20 | BF2F | VIA 1 LCD IRQ | 16 |
| BF30 | BF3F | VIA 2 | 16 |
| BF40 | BF4F | VIA 3 | 16 |
| BF50 | BF53 | ACIA 1 | 4 |
| BF54 | BF57 | ACIA 2 | 4 |
| BF58 | BF5B | --- (ACIA 3) | 4 |
| BF5C | BF5F | --- (ACIA 4) | 4 |
| BF60 | BF7F | SID 8580 | 32 |
| BF80 | BF87 | Simple IDE | 8 |
| BF88 | BF8F | CF Card | 8 |
| BF90 | BF9F | RTC | 16 |
| BFA0 | BFFF | --- | 96 |
Interrupts
The TPI Chip for the memory banks also functions as a priority interrupt controller, providing 5 seperate interrupt lines.
IRQ_0 is further divided into 8 lines for communication modules, giving an overall of 14 available IRQ-Lines.
These are currently used as follows:
- IRQ -> TPI
- IRQ_0 -> VIA0
- IRQ_0.0 -> ACIA0
- IRQ_0.1 -> ACIA1
- IRQ_0.2 -> ACIA2
- IRQ_0.3 -> ACIA3
- IRQ_0.4 -> RTC
- IRQ_0.5 -> ---
- IRQ_0.6 -> ---
- IRQ_0.7 -> ---
- IRQ_1 -> VIA1
- IRQ_2 -> VIA2
- IRQ_3 -> ---
- IRQ_4 -> ---
- IRQ_0 -> VIA0
- NMI -> ---
Note that the NMI is connected to a push button on the bus board.
Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +28 |
| 16 | Bus_PCI_6502 | Eigene:TE_5145154-4 | J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16, J17, J18 |
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6 |
| 6 | 10k | Resistor_THT:R_Array_SIP9 | RN1, RN2, RN3, RN4, RN5, RN6 |
| 6 | GAL16V8 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U4, U6, U8, U10, U12, U14 |
| 6 | SA39-11EWA | Display_7Segment:Sx39-1xxxxx | U3, U5, U7, U9, U11, U13 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | SY317 | Package_TO_SOT_THT:TO-220-3_Vertical | U1, U2 |
| 1 | DC In | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | LOGO | Eigene:logo | G*** |
| 1 | NMI | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Val** | Eigene:ladder_4 | Ref** |
The 97 most common of 132 parts.
More from Synthron/S65
12- 2 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

Similar boards
- 2 layers70 × 65 mm

Digital Voltmeter
tejasgolhar2/Digital-Voltmeter
The mini-project which aims to measure the voltage precisely. The voltmeter uses ICL7107 Analog to Digital Converter Microprocessor
31 parts2 - 2 layers85.7 × 54 mm

- 2 layers60 × 70 mm

- 2 layers126.3 × 210 mm

- 4 layers100 × 70 mm

ZSWatch Watch DevKit
ZSWatch/Watch-DevKit-HW
The hardware repo for the ZSWatch Development Kit.
132 parts188GPL-3.0 - 4 layers63 × 85 mm

FujiNet O2-Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
132 parts142 - 4 layers55 × 73.5 mm

- 4 layers223.3 × 120.1 mm

ISA FPGA v2
robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.
132 parts78
Questions
How big is the Bus Card PCB?
It measures 350 × 107.9 mm and has 4 copper layers, 2.61 mm thick.
What parts does the Bus Card use?
132 parts, built around the SA39-11EWA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bus Card KiCad files?
From the Synthron/S65 repository on GitHub, at the commit this page was made from: the board is Hardware/modules/Bus_Card/Bus_Card.kicad_pcb and its schematic Hardware/modules/ACIA2/ACIA2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bus Card design in my own project?
Its repository states no licence, so its author keeps all rights: ask Synthron before reusing the design.