4 layers100 × 100 mm
2 layers80 × 100 mm
Plantomation
Synthron/Plantomation10DIY plant watering system
- Size
- 80 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 89
- Pads
- 311
- Tracks, vias
- 576, 133
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Nov 2023
- Updated
- 15 Jun 2024
Overview
Plantomation is an open-source printed circuit board by Synthron, from the Synthron/Plantomation repository on GitHub. It is a 2-layer board of 80 × 100 mm with 96 parts on 89 nets, routed with 576 tracks and 133 vias.
It is built around the ESP32-WROOM-32, GSD090012SEU and AMS1117-3.3, with the L7805, USBLC6-2SC6 and LL4148 among its other parts. Its parts include 29 resistors, 20 capacitors, 13 connectors, 9 diodes and 7 transistors. It belongs with the ESP32 boards of this library.
Main components
9
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesGSD090012SEU
-2.95mm Connector and Ejector MicroSD Card (TF Card) Push-Pull With Locating Pins Yes - SD Card / Memory Card Connector ROHSAmphenolSD Card / Memory Card Connector
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBC846
SOT-23-65℃~+150℃ 1 NPN 100mA 110 15nA 250mW 400mV 65V 6V 770MHz NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
DMG1012UW-7-VB
SC-70-3SC-70-3 MOSFETs ROHSVBsemi ElecMOSFETs
README
README.mdPlantomation
Automatic Plant Watering System with ESP32
V1
Capable of handling 4 channels simultaneously with one pump
V2
Capable of handling 12 channels simultaneously with two pumps
WORK IN PROGRESS
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8, R9, R12, R14, R16, R18, R19, R21, R30 |
| 9 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C3, C4, C6, C8, C9, C12, C13, C19 |
| 6 | 100 | Resistor_SMD:R_0805_2012Metric | R3, R22, R23, R24, R25, R28 |
| 5 | 100k | Resistor_SMD:R_0805_2012Metric | R10, R13, R15, R17, R20 |
| 5 | 1n | Capacitor_SMD:C_0805_2012Metric | C15, C16, C17, C18, C20 |
| 5 | 4k7 | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R11, R31 |
| 5 | 4µ7 | Capacitor_SMD:C_0805_2012Metric | C2, C7, C10, C11, C14 |
| 5 | LL4148 | Diode_SMD:D_MiniMELF | D5, D6, D7, D8, D9 |
| 4 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q4, Q5, Q6, Q7 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 2 | BC846 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | 12V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | 1µ | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | ADC1_0 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J10 |
| 1 | ADC1_4 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | ADC1_5 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | ADC1_6 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | ADC1_7 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BOOT | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW2 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U5 |
| 1 | DMG1012UW7 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | D²PAK | Heatsink:Heatsink_Fischer_FK24413DPAK_23x13mm | HS1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | GSD090012SEU | eigene:GSD090012SEU | J14 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | LOGO | local:plantomation_logo | G*** |
| 1 | LOGO | TheBrutzlers_Lib:approved_theBrutzler | G*** |
| 1 | LOGO | eigene:logo | G*** |
| 1 | PeriPump | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | RST | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | SMB-001 | eigene:SMB-002 | FB1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J2 |
| 1 | VBUS Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Valve 1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8 |
| 1 | Valve 2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | Valve 3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11 |
| 1 | Valve 4 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |
The 93 most common of 96 parts.
Questions
How big is the Plantomation PCB?
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Plantomation use?
96 parts, built around the ESP32-WROOM-32, GSD090012SEU, AMS1117-3.3 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Plantomation KiCad files?
From the Synthron/Plantomation repository on GitHub, at the commit this page was made from: the board is V1/Hardware/Plantomation.kicad_pcb and its schematic V1/Hardware/Plantomation.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Plantomation design in my own project?
Its repository states no licence, so its author keeps all rights: ask Synthron before reusing the design.
More from Synthron/Plantomation
1Similar boards
- 4 layers160 × 100 mm
- 4 layers240 × 70 mm
- 2 layers85 × 40 mm
- 4 layers120 × 100 mm
- 2 layers118.4 × 111.3 mm
Home Automation
vishalsaravanan-k/home-automation-using-esp32-and-relay
This project is a basic home automation system built using an ESP32, capable of turning appliances ON/OFF through both mobile app (via Wi-Fi) and an IR remote.
92 parts - 4 layers38.4 × 128.5 mm
- 4 layers38.4 × 128.5 mm
Plantpal
rajeev2705/PROJECTS
Welcome to my PCB projects repository! This space is dedicated to documenting my journey in designing, creating, and improving printed circuit boards (PCBs).
127 parts - 4 layers103 × 126 mm
Senzori iradiere
cs-pub-ro/smart-solar-irradiance-sensor
Open-source hardware & software for a smart wireless sensor that measures solar irradiance.
351 parts