2 layers52.3 × 10.5 mm
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0
2 layers40.6 × 39.6 mm
WinchBoard
synthetos/TerminationBoardConnector termination board for motorized winches
- Size
- 40.6 × 39.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 14
- Pads
- 65
- Tracks, vias
- 166, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Sep 2018
- Updated
- 10 Sep 2018
Overview
WinchBoard is an open-source printed circuit board by synthetos, from the synthetos/TerminationBoard repository on GitHub, published under the MIT licence. It is a 2-layer board of 40.6 × 39.6 mm with 29 parts on 14 nets, routed with 166 tracks and 11 vias.
README
README.mdTerminationBoard
Connector termination board for motorized winches
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | HOLE_GNDD | _Connector:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | CONN_01X02 | _Connector:Molex_KK-6410-02_02x2.54mm_Straight | P4, P5, P6 |
| 3 | CONN_01X04 | _Connector:Molex_KK-6410-04_04x2.54mm_Straight | P1, P2, P3 |
| 3 | Fiducial_Top | _Connector:Fiducial_0.040_Top | FID1, FID2, FID3 |
| 2 | GND | _Connector:Test_Point_SMD_0.040_Bottom | TT10, TT12 |
| 1 | +3.3v | _Connector:Test_Point_SMD_0.040_Bottom | TT9 |
| 1 | +Vanalog | _Connector:Test_Point_SMD_0.040_Bottom | TT14 |
| 1 | Aout | _Connector:Test_Point_SMD_0.040_Bottom | TT11 |
| 1 | CONN_01X03 | _Connector:0.100_1x3_small | P7 |
| 1 | DI1 | _Connector:Test_Point_SMD_0.040_Bottom | TT7 |
| 1 | DI2 | _Connector:Test_Point_SMD_0.040_Bottom | TT8 |
| 1 | GNDA | _Connector:Test_Point_SMD_0.040_Bottom | TT13 |
| 1 | HDMI_A | _Connector:FCI_10029449-11[13]RLF | J1 |
| 1 | SCL1 | _Connector:Test_Point_SMD_0.040_Bottom | TT1 |
| 1 | SCL2 | _Connector:Test_Point_SMD_0.040_Bottom | TT3 |
| 1 | SCL3 | _Connector:Test_Point_SMD_0.040_Bottom | TT5 |
| 1 | SDA1 | _Connector:Test_Point_SMD_0.040_Bottom | TT2 |
| 1 | SDA2 | _Connector:Test_Point_SMD_0.040_Bottom | TT4 |
| 1 | SDA3 | _Connector:Test_Point_SMD_0.040_Bottom | TT6 |
Questions
How big is the WinchBoard PCB?
It measures 40.6 × 39.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WinchBoard use?
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WinchBoard KiCad files?
From the synthetos/TerminationBoard repository on GitHub, at the commit this page was made from: the board is WinchBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WinchBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers56 × 20 mm
HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm
E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm
TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm
- 2 layers55 × 58 mm
