

Wobbly
- Size
- 100 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 72
- Pads
- 278
- Tracks, vias
- 529, 62
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 May 2021
- Updated
- 8 Aug 2021
Overview
Wobbly is an open-source printed circuit board by syic0o, from the syic0o/wobbly-pcb repository on GitHub. It is a 2-layer board of 100 × 70 mm with 102 parts on 72 nets, routed with 529 tracks and 62 vias.
It is built around the ATMEGA324PB-AU, ST1S10PHR and 74LVC1G58GM, with the LM1117-3.3, BSS138 and WS2812B among its other parts. Its parts include 25 resistors, 19 capacitors, 10 connectors, 8 diodes and 6 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7ATMEGA324PB-AU
TQFP-44(10x10)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 2KB 32KB 39 8 Bit AVR Built-in FLASH TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ST1S10PHR
SOIC-8-EP-25℃~+125℃ 1 1.5mA 2.5V~18V 3A 800mV~13.6V 900kHz~1.2MHz Adjustable Buck Buck Built-in Yes SOIC-8-EP DC-DC Converters ROHSSTMicroelectronicsDC-DC Converters74LVC1G58GM
XSON-6(1x1.5)-40℃~+125℃ 1 1.2V、1.9V、2.2V、2.3V、3.8V 1.65V~5.5V 300mV、400mV、450mV、550mV、550mV 32mA 32mA 4uA 5.1ns@5.5V,50pF 74LVC Series Configurable Multi-Function Gate XSON-6(1x1.5) Logic Gates ROHSNexperiaLogic GatesLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedFDS4141
SOP-8MOSFETsTECH PUBLIC
README
README.mdwoobly-pcb
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Library:C_1206 | C2, C7, C8, C9, C12, C13, C15, C16, C17, C18, C19 |
| 11 | 10k | Library:R_1206 | R12, R14, R15, R17, R18, R19, R20, R22, R23, R24, R25 |
| 6 | 1k | Library:R_1206 | R1, R2, R10, R11, R13, R21 |
| 5 | BSS138 | Library:SOT-23 | Q2, Q3, Q4, Q5, Q6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | 10u | Library:CP_2312 | C4, C5, C6 |
| 3 | Conn_01x04 | Library:PinHeader_1x04_P2.54mm | J6, J8, J9 |
| 3 | WS2812B | Library:LED_WS2812B | D5, D6, D7 |
| 2 | 22p | Library:C_1206 | C10, C11 |
| 2 | 330R | Library:R_1206 | R6, R16 |
| 2 | 4k7 | Library:R_1206 | R7, R8 |
| 2 | 74LVC1G58 | Library:SOT-457 | U4, U5 |
| 2 | Conn_01x02 | Library:Degson_15EDGRC-3.5 | J1, J2 |
| 2 | SW_Push | Library:SW_Push_SCHURTER_1301.9319 | SW2, SW3 |
| 1 | 100k | Library:R_1206 | R3 |
| 1 | 100u | Library:CP_Elec_6.3x5.8 | C14 |
| 1 | 10u | Library:L_TDK_NLC453232 | L2 |
| 1 | 20k | Library:R_1206 | R5 |
| 1 | 22u | Library:C_1210_Pad1.40x2.80mm | C3 |
| 1 | 3u3 | Library:L_TDK_RLF7030 | L1 |
| 1 | 4u7 | Library:C_1206 | C1 |
| 1 | 5k1 | Library:R_1206 | R4 |
| 1 | 7k5 | Library:R_1206 | R9 |
| 1 | ATmega324PB-AU | Library:TQFP-44 | U3 |
| 1 | BATT | Wobbly:batt | G11 |
| 1 | BLUE LED | Library:LED_0805 | D3 |
| 1 | BT | Wobbly:bt | G15 |
| 1 | Buzzer | Library:Buzzer_13.8x6.8RM7.6 | BZ1 |
| 1 | CONN | Wobbly:conn | G6 |
| 1 | Conn_01x03 | Library:PinHeader_1x03_P2.54mm | J5 |
| 1 | Conn_01x06 | Library:PinHeader_1x06_P2.54mm | J4 |
| 1 | Conn_01x08 | Library:PinHeader_1x08_P2.54mm | J7 |
| 1 | Conn_01x14 | Library:PinHeader_1x14_P2.54mm | J10 |
| 1 | Conn_02x03_Odd_Even | Library:PinHeader_2x03_P2.54mm | J3 |
| 1 | Crystal | Library:Crystal_HC49US | Y1 |
| 1 | D | Library:D_SOD-80 | D8 |
| 1 | DRV | Wobbly:drv | G16 |
| 1 | ENC L | Wobbly:enc_l | G18 |
| 1 | ENC R | Wobbly:enc_r | G17 |
| 1 | EXT | Wobbly:ext | G3 |
| 1 | FDS4141 | Library:SO-8 | Q1 |
| 1 | FUN | Wobbly:fun | G8 |
| 1 | GREEN LED | Library:LED_0805 | D2 |
| 1 | IMU | Wobbly:imu | G14 |
| 1 | ISP | Wobbly:isp | G9 |
| 1 | LM1117 | Library:SOT-223-4 | U2 |
| 1 | LOGO | Wobbly:wobbly_logo | G1 |
| 1 | PWR | Wobbly:pwr | G4 |
| 1 | PWR SW | Wobbly:pwr_sw | G13 |
| 1 | RED LED | Library:LED_0805 | D1 |
| 1 | RST | Wobbly:rst | G10 |
| 1 | SIG | Wobbly:sig | G7 |
| 1 | ST1S10PHR | Library:Power_SO-8 | U1 |
| 1 | STATE | Wobbly:state | G5 |
| 1 | SW_SPDT | Library:SW_Slide_CE_SL19121 | SW1 |
| 1 | VERSION | Wobbly:version | G2 |
| 1 | VSW | Wobbly:vsw | G12 |
| 1 | YELLOW LED | Library:LED_0805 | D4 |
Similar boards
- 4 layers120 × 75 mm

- 2 layers68.8 × 68.1 mm

SmartSensor
AvansETI/SmartSensor
SmartSensor: a sensor to be used as sensor and actuator within existing buildings.
68 parts2GPL-3.0 - 2 layers104 × 49 mm

Control
mehmetkara7/DC-Motor-Control
This project demonstrates motor control using an ACS712 current sensor with an Atmega324PB microcontroller. The microcontroller controls the motor speed and direction based on the current measured by the ACS712 sensor.
49 parts1 - 2 layers92 × 117 mm

- 2 layers24.4 × 64.5 mm

- 2 layers147.3 × 95.3 mm

Nixie proj conflict-20171112-163801
dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0
117 parts11GPL-3.0 - 2 layers140 × 72.5 mm

Nixie proj
dm2lct/Nixieclock_kit
This is a Nixie-clock controlled by a ESP8266 module with NTP and MQTT support.
119 parts9GPL-3.0 - 2 layers141 × 56.9 mm

Questions
How big is the Wobbly PCB?
It measures 100 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wobbly use?
102 parts, built around the ATMEGA324PB-AU, ST1S10PHR, 74LVC1G58GM and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wobbly KiCad files?
From the syic0o/wobbly-pcb repository on GitHub, at the commit this page was made from: the board is wobbly.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wobbly design in my own project?
Its repository states no licence, so its author keeps all rights: ask syic0o before reusing the design.