2 layers100 × 100 mm
Heatplate v1.1
DerSpatz/PCB-reflow-solder-heat-plate
hardware design for a PCB reflow solder heat plate
57 parts179MIT
2 layers60 × 80 mm
Flight Controller using Raspberry pi pico
syeedameen/Effortless-flight-controllerSimplify Your Drone with Raspberry Pi Pico Development Board.
- Size
- 60 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 51
- Pads
- 148
- Tracks, vias
- 188, 6
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Jun 2024
- Updated
- 22 Jun 2024
Overview
Flight Controller using Raspberry pi pico is an open-source printed circuit board by syeedameen, from the syeedameen/Effortless-flight-controller repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 60 × 80 mm with 21 parts on 51 nets, routed with 188 tracks and 6 vias.
It is built around the AMS1117-5.0. Its parts include 5 connectors, 3 resistors, 2 capacitors, 2 ICs and 1 diode. It belongs with the robots and motor control boards and the RP2040 boards of this library.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.5mm_Pad | H1, H2, H3, H4 |
| 2 | 10uf | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C2 |
| 2 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3 |
| 1 | 300 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BMP280_Module | Charleslabs_Parts:BMP280_Module | A1 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_Kingstate_KCG0601 | BZ1 |
| 1 | ESC_1 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | ESC_2 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | ESC_3 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | ESC_4 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | MPU6050_Module | Charleslabs_Parts:MPU6050_Module | A3 |
| 1 | Power Supply | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | RGB LED | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D1 |
| 1 | Raspberry Pi Pico Development Board | RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | SD_Card_Module | Charleslabs_Parts:SD_Card_Module | A2 |
Questions
How big is the Flight Controller using Raspberry pi pico PCB?
It measures 60 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flight Controller using Raspberry pi pico use?
21 parts, built around the AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flight Controller using Raspberry pi pico KiCad files?
From the syeedameen/Effortless-flight-controller repository on GitHub, at the commit this page was made from: the board is Hardware/Flight Controller using Raspberry pi pico.kicad_pcb and its schematic Hardware/Flight Controller using Raspberry pi pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flight Controller using Raspberry pi pico design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers20.3 × 110 mm
4HPico
rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2
73 parts84 - 2 layers36 × 43 mm
Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
119 parts52GPL-3.0 - 2 layers73 × 113 mm
- 2 layers30 × 110.5 mm
Kicad main
johannesstrueber/dots
DOTS eurorack module pcb schematics and code ATMega328 based
72 parts28 - 2 layers139.7 × 88.9 mm
- 2 layers135 × 100 mm
- 2 layers160 × 138 mm
