2 layers242.6 × 227 mm
Production1
switchcraft/kicad-projects
KiCad Project files, schematic files, layout files and netlists
162 parts6
2 layers
TestKiCad5
switchcraft/kicad-projects6KiCad Project files, schematic files, layout files and netlists
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 2
- Nets
- 4
- Pads
- 4
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jul 2017
- Updated
- 6 Jan 2019
Overview
TestKiCad5 is an open-source printed circuit board by switchcraft, from the switchcraft/kicad-projects repository on GitHub. It is a 2-layer board with 2 parts on 4 nets.
Its parts include 1 capacitor and 1 resistor.
README
Main_PECC/README.mdMAIN-PECC
This is the Power Electronics Connection Card
It is intended to be a base card for the frond-end diode bridge and the main three phase transistor bridge.
It features connetions to gate drivers, DC-link capacitor, brake chopper plus mains and motor.
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | C | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | R | Resistors_SMD:R_1206_HandSoldering | R1 |
More from switchcraft/kicad-projects
10- 4 layers215 × 126 mm
Inverter card 2
switchcraft/kicad-projects
KiCad Project files, schematic files, layout files and netlists
71 parts6 - 2 layers126 × 52.2 mm
Pre charge controller
switchcraft/kicad-projects
KiCad Project files, schematic files, layout files and netlists
57 parts6 - 2 layers95 × 70 mm
Current sensor
switchcraft/kicad-projects
KiCad Project files, schematic files, layout files and netlists
46 parts6 - 2 layers90 × 50 mm
Gate driver
switchcraft/kicad-projects
KiCad Project files, schematic files, layout files and netlists
39 parts6 - 2 layers
Gate driver
switchcraft/kicad-projects
KiCad Project files, schematic files, layout files and netlists
34 parts6 - 2 layers150 × 71 mm
Volt sensor
switchcraft/kicad-projects
KiCad Project files, schematic files, layout files and netlists
29 parts6 - 2 layers138 × 70 mm
Front End card
switchcraft/kicad-projects
KiCad Project files, schematic files, layout files and netlists
25 parts6 - 2 layers154.8 × 75.2 mm
Main PECC
switchcraft/kicad-projects
KiCad Project files, schematic files, layout files and netlists
25 parts6 - 2 layers76 × 80 mm
Inverter card
switchcraft/kicad-projects
KiCad Project files, schematic files, layout files and netlists
23 parts6
Similar boards
- 2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0 - 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
Questions
What parts does the TestKiCad5 use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TestKiCad5 KiCad files?
From the switchcraft/kicad-projects repository on GitHub, at the commit this page was made from: the board is TestKiCad5/TestKiCad5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TestKiCad5 design in my own project?
Its repository states no licence, so its author keeps all rights: ask switchcraft before reusing the design.