Skip to the content
2 layers138 × 70 mmFront End card, the printed circuit board in 3D

KiCad Project files, schematic files, layout files and netlists

Size
138 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
18
Pads
69
Tracks, vias
158, 0
Routed
Yes
KiCad
KiCad 4
Created
16 Jul 2017
Updated
6 Jan 2019

Overview

Front End card is an open-source printed circuit board by switchcraft, from the switchcraft/kicad-projects repository on GitHub. It is a 2-layer board of 138 × 70 mm with 25 parts on 18 nets, routed with 158 tracks and 0 vias.

Its parts include 6 capacitors, 6 connectors, 3 resistors, 3 ICs and 1 diode.

README

Main_PECC/README.md

MAIN-PECC

This is the Power Electronics Connection Card

It is intended to be a base card for the frond-end diode bridge and the main three phase transistor bridge.

It features connetions to gate drivers, DC-link capacitor, brake chopper plus mains and motor.

Parts

25
QtyValueFootprintReferences
30.1uFCapacitors_SMD:C_1206_HandSolderingC1, C3, C5
3ACS758xCB-PFFAllegro:ACS758LCB-050B-PFF-TU1, U2, U3
3CCapacitors_SMD:C_1206_HandSolderingC2, C4, C6
3CONN_01X02Phoenix_Contact:MSTBA_25_2p_G_508-1757242J3, J4, J5
3RResistors_SMD:R_1206_HandSolderingR1, R2, R3
2CONN_01X03Phoenix_Contact:MSTBA_25_3p_G_508-1757488J1, J2
1CONN_01X04Phoenix_Contact:MSTBA_25_4p_G_508-1757268J6
1LOGOSwitchcraft:Switchcraft_medium_logoG***
1SK_95_DGL_126Semikron:SK_95_DGL_126D1

The 20 most common of 25 parts.

More from switchcraft/kicad-projects

10
  • 2 layers242.6 × 227 mmProduction1, the printed circuit board in 3D

    Production1

    switchcraft/kicad-projects

    KiCad Project files, schematic files, layout files and netlists

    162 parts6
  • 4 layers215 × 126 mmInverter card 2, the printed circuit board in 3D

    Inverter card 2

    switchcraft/kicad-projects

    KiCad Project files, schematic files, layout files and netlists

    71 parts6
  • 2 layers126 × 52.2 mmPre charge controller, the printed circuit board in 3D

    Pre charge controller

    switchcraft/kicad-projects

    KiCad Project files, schematic files, layout files and netlists

    57 parts6
  • 2 layers95 × 70 mmCurrent sensor, the printed circuit board in 3D

    Current sensor

    switchcraft/kicad-projects

    KiCad Project files, schematic files, layout files and netlists

    46 parts6
  • 2 layers90 × 50 mmGate driver, the printed circuit board in 3D

    Gate driver

    switchcraft/kicad-projects

    KiCad Project files, schematic files, layout files and netlists

    39 parts6
  • 2 layersGate driver, the printed circuit board in 3D

    Gate driver

    switchcraft/kicad-projects

    KiCad Project files, schematic files, layout files and netlists

    34 parts6
  • 2 layers150 × 71 mmVolt sensor, the printed circuit board in 3D

    Volt sensor

    switchcraft/kicad-projects

    KiCad Project files, schematic files, layout files and netlists

    29 parts6
  • 2 layers154.8 × 75.2 mmMain PECC, the printed circuit board in 3D

    Main PECC

    switchcraft/kicad-projects

    KiCad Project files, schematic files, layout files and netlists

    25 parts6
  • 2 layers76 × 80 mmInverter card, the printed circuit board in 3D

    Inverter card

    switchcraft/kicad-projects

    KiCad Project files, schematic files, layout files and netlists

    23 parts6
  • 2 layersTestKiCad5, the printed circuit board in 3D

    TestKiCad5

    switchcraft/kicad-projects

    KiCad Project files, schematic files, layout files and netlists

    2 parts6

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the Front End card PCB?

It measures 138 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Front End card use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Front End card KiCad files?

From the switchcraft/kicad-projects repository on GitHub, at the commit this page was made from: the board is Front_End_card/Front_End_card.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Front End card design in my own project?

Its repository states no licence, so its author keeps all rights: ask switchcraft before reusing the design.