Skip to the content
2 layers61 × 55.9 mmVideoadc, the printed circuit board in 3D

RGB video input for Altera DE1 board + PAL Modulator

Size
61 × 55.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
45
Pads
149
Tracks, vias
338, 30
Pours
10
Routed
Yes
KiCad
KiCad 3
Created
12 Aug 2014
Updated
15 May 2023

Overview

Videoadc is an open-source printed circuit board by svofski, from the svofski/videoconditioner repository on GitHub. It is a 2-layer board of 61 × 55.9 mm with 56 parts on 45 nets, routed with 338 tracks and 30 vias.

It is built around the LM358 and BAT54S. Its parts include 14 capacitors, 10 resistors, 4 diodes, 2 connectors and 1 IC.

Main components

2

README

hw/README.md

These are KiCAD design files for Video ADC addon for DE1 FPGA Board.

The circuit

Parts

56
QtyValueFootprintReferences
21CONN_1Connect:PINTSTPB0, PB1, PB2, PB3, PB4, PB10, PB11, PB12, PB17, PB18, PB19, PB20, PB21, PB22, PB23, PB24 +5
60.1Capacitors_SMD:c_0603C1, C10, C11, C12, C13, C14
410KPotentiometer_Custom:Potentiometer_CA6VRV1, RV2, RV3, RV4
4120Resistors_SMD:Resistor_SMD0805_ReflowWaveR6, R7, R8, R9
4220Capacitors_SMD:c_0805C6, C7, C8, C9
433.0Capacitors_Tantalum_SMD:TantalC_SizeC_EIA-6032_HandSolderingC2, C3, C4, C5
475Resistors_SMD:Resistor_SMD0805_ReflowWaveR2, R3, R4, R5
4BAT54SSMD_Packages:SOT23-SPECIALD1, D2, D3, D4
210KResistors_SMD:Resistor_SMD0805_ReflowWaveR1, R11
1CONN_20X2Pin_Headers:Pin_Header_Straight_2x20P2
1CONN_4X2Pin_Headers:Pin_Header_Straight_2x04P1
1LM358SMD_Packages:SO8EU1

Similar boards

  • 2 layers84.3 × 64.5 mmTapeshnik proto, the printed circuit board in 3D

    Tapeshnik proto

    svofski/tapeshnik

    compact cassette data drive

    138 parts14
  • 2 layers91.4 × 40.6 mmMhixy, the printed circuit board in 3D

    Mhixy

    iblue/mhi-xy-bus

    Reverse engineering of the Mitsubishi Heavy Industries X/Y Bus as used in FDUM air condition

    70 parts6
  • 2 layers92.4 × 113.4 mmAutomation, the printed circuit board in 3D

    Automation

    CK20000/STM32-Digital-Twin-Project-Status-Architecture

    Tired of paywalled PCB simulators? Open-source, physics-accurate digital twin for KiCad. Real MCU (Renode), real analog (ngspice), live PyQt6 dashboard. No stubs, no fake numbers. Fork and grow it.

    143 parts2MIT
  • 2 layers100 × 50 mmDew Controller, the printed circuit board in 3D

    Dew Controller

    kuellenberg/Dew-Controller

    Dew heater controller for telescope dew heater straps

    92 parts2
  • 2 layers100 × 99.9 mmBattery capacity meter-2024, the printed circuit board in 3D

    Battery capacity meter-2024

    ikatkov/battery-capacity-meter

    Vref pin on Arduino Pro Mini breakout board is not on any pin, solder a wire to capacitor between pins 12 and 13. To the pin13 end.

    77 parts1
  • 2 layers103 × 95 mmDSO, the printed circuit board in 3D

    DSO

    Aryan-Kodan/Two_Channel_DSO

    A custom Multi-Channel Digital Storage Oscilloscope (DSO) designed using the STM32F103C8T6 microcontroller. This project combines a custom analog front-end, trigger circuitry, anti-alias filtering, multi-channel…

    94 parts

Questions

How big is the Videoadc PCB?

It measures 61 × 55.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Videoadc use?

56 parts, built around the LM358 and BAT54S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Videoadc KiCad files?

From the svofski/videoconditioner repository on GitHub, at the commit this page was made from: the board is hw/videoadc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Videoadc design in my own project?

Its repository states no licence, so its author keeps all rights: ask svofski before reusing the design.