Skip to the content
2 layers71.1 × 77.5 mmCartuchnik, the printed circuit board in 3D

Flash Cartridge for Vectrex on LPC1769

Size
71.1 × 77.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
76
Pads
217
Tracks, vias
454, 17
Pours
2
Routed
Yes
KiCad
KiCad 3
Created
2 Sep 2014
Updated
12 Feb 2016

Overview

Cartuchnik is an open-source printed circuit board by svofski, from the svofski/cartuchnik repository on GitHub. It is a 2-layer board of 71.1 × 77.5 mm with 20 parts on 76 nets, routed with 454 tracks and 17 vias.

Its parts include 4 resistors, 3 ICs, 3 switches, 1 capacitor and 1 connector.

README

README.md

cartuchnik

Flash Cartridge for Vectrex on LPC1769

Here's a youtube of an early test of Cartuchnik: http://www.youtube.com/watch?v=1frCw8D-Ybc

And here's the loader menu: http://www.youtube.com/watch?v=H1Qx4sDnVfg

This is a flash cartridge for Vectrex console. It uses internal flash memory LPC1769 for ROM storage. LPC1769 shows itself to the host as a mass storage device where ROM files can be copied. There is a loader program that allows selection of ROM file when Vectrex is first powered up. 64K roms are supported.

The hardware is LPC1769 Expresso board with an add-on board that plugs into the cartridge slot.

The project is very quirky, especially the mass storage part that's based on LPC port of LUFA, which was extremely disappointingly buggy at the time of Cartuchnik development. However it works and can be used as a development cartridge if you don't mind some messing around.

  • kicad contains design files for LPC1769 Expresso board "shield" that plugs directly into the Vectrex.
  • loader is the loader code that's executed on the Vectrex and provides interface for ROM selection
  • firmware LPC1769 code

The loader should be compiled using [https://github.com/bcd/gcc]. I had trouble compiling the compiler on my system and here's a fork that builds on my machine: [https://github.com/svofski/gcc]

Parts

20
QtyValueFootprintReferences
8R_PACK4r_cat16-4RP1, RP2, RP3, RP4, RP5, RP6, RP7, RP8
2220SM0805R3, R4
23K3SM0805R1, R2
2SW_PUSHsmd_pushSW1, SW2
14052SO16EU3
1CONN_3PIN_ARRAY_3X1K1
1CP1c_tant_DC1
1LPCXPRESSO_1LPCXPRESSOU2
1USB-MINI-Bconn_usb_B_micro_smdCON1
1VECTREXCONNVECTREX_CARTRIDGEU1

Similar boards

  • 2 layers66.9 × 74.5 mmDeskHop Rev1, the printed circuit board in 3D

    DeskHop Rev1

    hrvach/deskhop

    Fast Desktop Switching Device

    20 parts7.9kGPL-3.0
  • 2 layers86.4 × 64.8 mmSlot machine, the printed circuit board in 3D

    Slot machine

    google/google-ctf

    Google CTF

    20 parts5.1kApache-2.0
  • 2 layers36.2 × 26.8 mmEsp32 minimal, the printed circuit board in 3D

    Esp32 minimal

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    20 parts4kMIT
  • 2 layers108.1 × 393.8 mmSweep compact ble, the printed circuit board in 3D

    Sweep compact ble

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    20 parts2.1k
  • 2 layers26 × 15.9 mmTPS54340 Buck Regulator, the printed circuit board in 3D

    TPS54340 Buck Regulator

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    20 parts1.2k
  • 2 layers67.6 × 30.5 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    20 parts1kGPL-3.0
  • 2 layers44.3 × 28.7 mmLin bus adapter esp32, the printed circuit board in 3D

    Lin bus adapter esp32

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    20 parts915
  • 2 layers89.5 × 61.6 mmFreeDeck TH 2020-02, the printed circuit board in 3D

    FreeDeck TH 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    20 parts772

Questions

How big is the Cartuchnik PCB?

It measures 71.1 × 77.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cartuchnik use?

20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cartuchnik KiCad files?

From the svofski/cartuchnik repository on GitHub, at the commit this page was made from: the board is kicad/cartuchnik.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cartuchnik design in my own project?

Its repository states no licence, so its author keeps all rights: ask svofski before reusing the design.