

Cartuchnik
Flash Cartridge for Vectrex on LPC1769
- Size
- 71.1 × 77.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 76
- Pads
- 217
- Tracks, vias
- 454, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 2 Sep 2014
- Updated
- 12 Feb 2016
Overview
Cartuchnik is an open-source printed circuit board by svofski, from the svofski/cartuchnik repository on GitHub. It is a 2-layer board of 71.1 × 77.5 mm with 20 parts on 76 nets, routed with 454 tracks and 17 vias.
Its parts include 4 resistors, 3 ICs, 3 switches, 1 capacitor and 1 connector.
README
README.mdcartuchnik
Flash Cartridge for Vectrex on LPC1769
Here's a youtube of an early test of Cartuchnik: http://www.youtube.com/watch?v=1frCw8D-Ybc
And here's the loader menu: http://www.youtube.com/watch?v=H1Qx4sDnVfg
This is a flash cartridge for Vectrex console. It uses internal flash memory LPC1769 for ROM storage. LPC1769 shows itself to the host as a mass storage device where ROM files can be copied. There is a loader program that allows selection of ROM file when Vectrex is first powered up. 64K roms are supported.
The hardware is LPC1769 Expresso board with an add-on board that plugs into the cartridge slot.
The project is very quirky, especially the mass storage part that's based on LPC port of LUFA, which was extremely disappointingly buggy at the time of Cartuchnik development. However it works and can be used as a development cartridge if you don't mind some messing around.
- kicad contains design files for LPC1769 Expresso board "shield" that plugs directly into the Vectrex.
- loader is the loader code that's executed on the Vectrex and provides interface for ROM selection
- firmware LPC1769 code
The loader should be compiled using [https://github.com/bcd/gcc]. I had trouble compiling the compiler on my system and here's a fork that builds on my machine: [https://github.com/svofski/gcc]
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R_PACK4 | r_cat16-4 | RP1, RP2, RP3, RP4, RP5, RP6, RP7, RP8 |
| 2 | 220 | SM0805 | R3, R4 |
| 2 | 3K3 | SM0805 | R1, R2 |
| 2 | SW_PUSH | smd_push | SW1, SW2 |
| 1 | 4052 | SO16E | U3 |
| 1 | CONN_3 | PIN_ARRAY_3X1 | K1 |
| 1 | CP1 | c_tant_D | C1 |
| 1 | LPCXPRESSO_1 | LPCXPRESSO | U2 |
| 1 | USB-MINI-B | conn_usb_B_micro_smd | CON1 |
| 1 | VECTREXCONN | VECTREX_CARTRIDGE | U1 |
Similar boards
- 2 layers66.9 × 74.5 mm

- 2 layers86.4 × 64.8 mm

- 2 layers36.2 × 26.8 mm

Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm

Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm

TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm

Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm

FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Cartuchnik PCB?
It measures 71.1 × 77.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cartuchnik use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cartuchnik KiCad files?
From the svofski/cartuchnik repository on GitHub, at the commit this page was made from: the board is kicad/cartuchnik.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cartuchnik design in my own project?
Its repository states no licence, so its author keeps all rights: ask svofski before reusing the design.