
P300 HiVolt
svenjust/room-ventilation-system
Arduino Projekt für ein Lüftungsgerät zur kontrollierten Wohnraum Lüftung (KWL)

Arduino Projekt für ein Lüftungsgerät zur kontrollierten Wohnraum Lüftung (KWL)
P300 Arduino IF is an open-source printed circuit board by svenjust, from the svenjust/room-ventilation-system repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 34 parts on 100 nets, routed with 358 tracks and 7 vias.
Its parts include 16 connectors, 12 resistors, 2 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7, R8, R9, R10 |
| 4 | 4.7k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4 |
| 2 | 100nF | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 220 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5, R6 |
| 2 | 4,7k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11, R12 |
| 2 | PC817 | Package_DIP:DIP-4_W7.62mm | U1, U2 |
| 1 | 12V | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J9 |
| 1 | 12V_en | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 5V | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J14 |
| 1 | Arduino_Mega2560_Shield | Arduino_Mega2560_Shield | XA1 |
| 1 | CO2 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J13 |
| 1 | DHT1 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J2 |
| 1 | DHT2 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J3 |
| 1 | Fan control | Connector_Molex:Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical | J4 |
| 1 | I2C | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J12 |
| 1 | Pressure Analog | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J10 |
| 1 | Relay brd | Connector_Molex:Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | J1 |
| 1 | TEMP1 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J5 |
| 1 | TEMP2 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J6 |
| 1 | TEMP3 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J7 |
| 1 | TEMP4 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J8 |
| 1 | TFT Display 1 | Connectors_Molex:Molex_KK-6410-08_08x2.54mm_Straight | J15 |
| 1 | TFT Display 2 | Connectors_Molex:Molex_KK-6410-08_08x2.54mm_Straight | J16 |
| 1 | TGS2600 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J11 |

svenjust/room-ventilation-system
Arduino Projekt für ein Lüftungsgerät zur kontrollierten Wohnraum Lüftung (KWL)

svenjust/room-ventilation-system
Arduino Projekt für ein Lüftungsgerät zur kontrollierten Wohnraum Lüftung (KWL)


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7


baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
34 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the svenjust/room-ventilation-system repository on GitHub, at the commit this page was made from: the board is hardware/P300_Arduino_IF/P300_Arduino_IF.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).