2 layers39 × 30.5 mm
Iot
superhasduper/makers_proyectos_iot
proyecto de maker proyectos de techtalents de iot con arduino
22 parts1MIT
2 layers40.4 × 32.3 mm
proyecto de maker proyectos de techtalents de iot con arduino
- Size
- 40.4 × 32.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 15
- Pads
- 73
- Tracks, vias
- 238, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Feb 2018
- Updated
- 16 Jun 2018
Overview
Iot is an open-source printed circuit board by superhasduper, from the superhasduper/makers_proyectos_iot repository on GitHub, published under the MIT licence. It is a 2-layer board of 40.4 × 32.3 mm with 24 parts on 15 nets, routed with 238 tracks and 21 vias.
It is built around the DHT11, WS2812B and LM1117-3.3. Its parts include 8 capacitors, 6 ICs, 2 connectors, 1 resistor and 1 switch. It belongs with the home automation and IoT boards of this library.
Main components
3
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
README
README.mdmakers_proyectos_iot
proyecto de maker proyectos de techtalents de iot con arduino if you want to access the pcb files use kicad latest pcb is finished
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C4, C6, C7, C8 |
| 5 | WS2812b | LEDs:LED_WS2812B-PLCC4 | U1, U2, U3, U4, U5 |
| 2 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | RX, TX |
| 1 | 10uF | Capacitors_THT:CP_Radial_D4.0mm_P1.50mm | C3 |
| 1 | 22uF | Capacitors_THT:CP_Radial_D4.0mm_P1.50mm | C5 |
| 1 | 4k7 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | Conn_02x04_Top_Bottom | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm | J1 |
| 1 | DHT11 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | DHT11 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U6 |
| 1 | LOGO | iot:logo | G*** |
| 1 | SW_Push_SPDT | Buttons_Switches_SMD:SW_SPDT_PCM12 | SW1 |
The 22 most common of 24 parts.
More from superhasduper/makers_proyectos_iot
1Similar boards
- 2 layers76.2 × 46.9 mm
IoT Messenger
PR77/IoT_Messenger
IoT Messenger (Pager) For Simple 1 Way Communication
64 parts3LGPL-3.0 - 2 layers107.9 × 76.7 mm
- 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers99 × 90.1 mm
Shield STM32 Bluepill
Rdisrael/KiCad-Projeto-Ensino-
Repository of projects carried out during the teaching project. contains: booklets, five projecs and KiCad files
70 parts2 - 2 layers88.9 × 150 mm
Keypad
souptik-samanta/Soup_Pad
This project involves the assembly of various electronic components, which I will be soldering by hand. Below is the Bill of Materials (BOM) for the project:
78 parts1 - 2 layers143.6 × 71.8 mm
Starbie
aishahisap123-code/starcade35
this is week one for hackclub's halflife hardware program
20 partsMIT - 2 layers82 × 100 mm
Robo car
ChefsSlaad/PCBs_and_Micropython
storing custom pcbs and micropython code for home projects
36 parts - 4 layers100 × 80 mm
Questions
How big is the Iot PCB?
It measures 40.4 × 32.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Iot use?
24 parts, built around the DHT11, WS2812B and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Iot KiCad files?
From the superhasduper/makers_proyectos_iot repository on GitHub, at the commit this page was made from: the board is iot/iot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Iot design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).