2 layers50 × 35 mm
2 layers68.6 × 53.3 mm
Shield num-2
superhasduper/shield-num-21it is an other Arduino shield pcb made in kicad
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 35
- Pads
- 57
- Tracks, vias
- 110, 30
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Jul 2019
- Updated
- 7 Jul 2019
Overview
Shield num-2 is an open-source printed circuit board by superhasduper, from the superhasduper/shield-num-2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.6 × 53.3 mm with 17 parts on 35 nets, routed with 110 tracks and 30 vias.
Its parts include 8 connectors, 4 resistors, 3 diodes and 1 switch.
README
README.mdshield-num-2
it is an other Arduino shield pcb made in kicad
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X01 | Socket_Arduino_Uno:Arduino_1pin | P5, P6, P7, P8 |
| 3 | 330R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4 |
| 1 | 10K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Analog | Socket_Arduino_Uno:Socket_Strip_Arduino_1x06 | P2 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P4 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x10 | P3 |
| 1 | LED_A | LEDs:LED_D5.0mm | D1 |
| 1 | LED_R | LEDs:LED_D5.0mm | D2 |
| 1 | LED_V | LEDs:LED_D5.0mm | D3 |
| 1 | POT | Potentiometers:Potentiometer_Trimmer_Piher_PT-10v10_Horizontal_Px10.0mm_Py5.0mm | RV1 |
| 1 | Power | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P1 |
| 1 | SW_Push_Dual | Buttons_Switches_THT:SW_PUSH_6mm | SW1 |
Questions
How big is the Shield num-2 PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shield num-2 use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shield num-2 KiCad files?
From the superhasduper/shield-num-2 repository on GitHub, at the commit this page was made from: the board is shield num 2/shield num 2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shield num-2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
