2 layers173 × 122.5 mm
2 layers68.6 × 53.3 mm
Shield num-1
superhasduper/shield-num-11it is an Arduino shield pcb made in kicad
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 51
- Pads
- 112
- Tracks, vias
- 236, 52
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Jul 2019
- Updated
- 7 Jul 2019
Overview
Shield num-1 is an open-source printed circuit board by superhasduper, from the superhasduper/shield-num-1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.6 × 53.3 mm with 49 parts on 51 nets, routed with 236 tracks and 52 vias.
Its parts include 19 resistors, 19 diodes and 8 connectors.
README
README.mdshield-num-1
it is an Arduino shield pcb made in kicad
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 330R | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 10 | LED | LEDs:LED_1206_HandSoldering | D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 6 | 330R | Resistors_SMD:R_0805_HandSoldering | R14, R15, R16, R17, R18, R19 |
| 6 | LED | LEDs:LED_0805_HandSoldering | D14, D15, D16, D17, D18, D19 |
| 4 | CONN_01X01 | Socket_Arduino_Uno:Arduino_1pin | P5, P6, P7, P8 |
| 1 | Analog | Socket_Arduino_Uno:Socket_Strip_Arduino_1x06 | P2 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P4 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x10 | P3 |
| 1 | LED azul | LEDs:LED_D5.0mm | D2 |
| 1 | LED rojo | LEDs:LED_D5.0mm | D1 |
| 1 | LED verde | LEDs:LED_D5.0mm | D3 |
| 1 | LOGO | hectorkicad:logo techtalents | G*** |
| 1 | Power | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P1 |
The 47 most common of 49 parts.
Questions
How big is the Shield num-1 PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shield num-1 use?
49 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shield num-1 KiCad files?
From the superhasduper/shield-num-1 repository on GitHub, at the commit this page was made from: the board is shield num 1/shield num 1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shield num-1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers85.1 × 49.8 mm
- 2 layers50 × 90 mm
- 2 layers126.4 × 15.2 mm
- 2 layers43 × 92.3 mm
DSKY driver
benkrasnow/DSKY_EL_replica
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
49 parts261MIT - 2 layers58 × 110 mm
- 2 layers61 × 42.5 mm
- 2 layers31 × 38 mm
