
EasyPCB 10 nrf24l01p
sundberg84/HomeAutomation
Everything from sundberg84 homeautomation - mostly for backup!

Everything from sundberg84 homeautomation - mostly for backup!
MysXDimmer is an open-source printed circuit board by sundberg84, from the sundberg84/HomeAutomation repository on GitHub. It is a 2-layer board of 36 × 39 mm with 80 parts on 6 nets, routed with 73 tracks and 0 vias.
It is built around the IRLZ44N. Its parts include 2 capacitors, 1 resistor, 1 IC and 1 transistor.
My homeautomation stuff backup place :)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 70 | ASKicadLib:Via_0,6 | , , , , , , , , , , , , , , , +54 | |
| 2 | CP1 | Capacitors_ThroughHole:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 1 | CONN_02X06 | mysensors_connectors:MYSX_2.4 | MysX |
| 1 | CONN_12vDC | w_conn_screw:mors_2p | VCC |
| 1 | CONN_LED | w_conn_screw:mors_2p | LED |
| 1 | IRLZ44 | ASKicadLib:TO-220-3_w_heatsink | Q1 |
| 1 | LM2940/LM2940C | ASKicadLib:TO-220-3_w_heatsink | U1 |
| 1 | LOGO | graphicslogo:OpenSourceLogo_1200x1200_Neg | G*** |
| 1 | R | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
The 79 most common of 80 parts.

sundberg84/HomeAutomation
Everything from sundberg84 homeautomation - mostly for backup!

sundberg84/HomeAutomation
Everything from sundberg84 homeautomation - mostly for backup!

sundberg84/HomeAutomation
Everything from sundberg84 homeautomation - mostly for backup!



pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec


MitchBradley/Esp32PrinterController
PCB design for 3D printer controller using ESP32 processor


robinolejnik/dmx-ledstrip-dimmer-32ch
Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.

Moragor/BatteryAnalyzer_MkII
Updated Version of the battery analyzer, now with constant current
It measures 36 × 39 mm and has 2 copper layers, 1.6 mm thick.
80 parts, built around the IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sundberg84/HomeAutomation repository on GitHub, at the commit this page was made from: the board is Hardware/Rev 09/Dimmer/MysXDimmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sundberg84 before reusing the design.