2 layers18.5 × 26 mm
24g2usb rp2350zero
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
4 parts1.7kApache-2.0
2 layers50.8 × 96.5 mm
Akashi-05
suikan4github/Akashi-05Dental Brushing Mirror
- Size
- 50.8 × 96.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 4
- Pads
- 12
- Tracks, vias
- 11, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Mar 2020
- Updated
- 5 Jul 2020
Overview
Akashi-05 is an open-source printed circuit board by suikan4github, from the suikan4github/Akashi-05 repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 50.8 × 96.5 mm with 4 parts on 4 nets, routed with 11 tracks and 0 vias.
Its parts include 1 resistor, 1 IC, 1 diode and 1 connector.
README
README.mdAkashi-05
概要
Akashi-05は照明付き歯磨き鏡基板です。LED照明をつかうことで、口の奥まで確認しながら歯磨きを行えます。部品はすべて秋月電子で購入可能です。
設計にはKiCad 5.1.6 を使用しました。PDF版の回路図もあります。
追記：この鏡は実際に使用していますが、推奨できません。もっと光の弱いLEDを5個程度並べる構造にすべきです。私は目に光が入らないよう遮蔽版を追加して使用しています。
部品表
| シンボル | 部品名 |
|---|---|
| U1 | ５Ｖ出力昇圧ＤＣＤＣコンバーター |
| D1 | 高輝度５ｍｍ白色ＬＥＤ |
| R1 | 68Ω 1/4W |
| 電池ボックス 単３x２ スイッチ付き |
鏡は100円均一で購入したものです。電池ボックスも鏡も通常の瞬間接着剤で基板に取り付けました。材質がポリプロピレンだと特殊な接着剤が必要になるので注意してください。
LEDは取り付け後に角度調整が必要になるため、基板から少し浮かせてハンダ付けします。直視すると明るすぎますが、歯磨き中は気になりません。
完成したら電源を入れて自分の口の中を鏡に映します。LEDの明かりが口の中を綺麗に照らすようにLEDの角度を調整してください。
ライセンス
Akashi-01はCC 1.0 Universalライセンスで配布しています。
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | AE-XCL102D503CR-G | Housings_DIP:DIP-6_W7.62mm_LongPads | U1 |
| 1 | Conn_01x02 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J1 |
| 1 | LED | LEDs:LED_D5.0mm | D1 |
| 1 | R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Questions
How big is the Akashi-05 PCB?
It measures 50.8 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Akashi-05 use?
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Akashi-05 KiCad files?
From the suikan4github/Akashi-05 repository on GitHub, at the commit this page was made from: the board is Akashi-05.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Akashi-05 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers116 × 33 mm
- 2 layers19 × 18 mm
Daughter board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
4 parts915 - 2 layers24.8 × 24.8 mm
Nrf24 breakout
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
4 parts803MIT - 2 layers26 × 20 mm
Cap chain
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
4 parts744MIT - 2 layers34.7 × 20 mm
XG Station Power MSI
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
4 parts712CC-BY-4.0 - 2 layers20.3 × 24.5 mm
Jack power input
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
4 parts546MIT - 2 layers35.1 × 92.1 mm
SDEX2M2 MicroSD Express to M.2 NVMe Adapter for Switch 2 WIP
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
4 parts542GPL-3.0