

ESP32-Based Humidity Sensor
My second PCB design
- Size
- 45.5 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 32
- Pads
- 40
- Tracks, vias
- 34, 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Oct 2026
- Updated
- 9 Oct 2026
Overview
ESP32-Based Humidity Sensor is an open-source printed circuit board by sudu7878, from the sudu7878/ESP32-Based-Humidity-Sensor repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.5 × 54 mm with 5 parts on 32 nets, routed with 34 tracks and 4 vias.
It is built around the DHT11. Its parts include 2 resistors, 2 ICs and 1 diode. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
Main components
1README
README.mdESP32-Based-Humidity-Sensor
My second PCB design
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10 kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 220 Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | ~ | ESP32_Footprints:ESP32_30pin | U1 |
Similar boards
- 2 layers96.6 × 82.8 mm

- 2 layers100 × 50 mm

Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm

- 2 layers

OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm

SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers

Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm

Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm

Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
How big is the ESP32-Based Humidity Sensor PCB?
It measures 45.5 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-Based Humidity Sensor use?
5 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-Based Humidity Sensor KiCad files?
From the sudu7878/ESP32-Based-Humidity-Sensor repository on GitHub, at the commit this page was made from: the board is src/src.kicad_pcb and its schematic src/src.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-Based Humidity Sensor design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).