
Dual cam pcb
strawlab/flo-hardware
build instructions and manual for the FLO BYO-camera insect tracking/filming setup

build instructions and manual for the FLO BYO-camera insect tracking/filming setup
Beetrax pcb2 is an open-source printed circuit board by strawlab, from the strawlab/flo-hardware repository on GitHub. It is a 2-layer board of 17.8 × 31.8 mm with 15 parts on 11 nets, routed with 132 tracks and 5 vias.
It is built around the OPR5911. Its parts include 4 capacitors, 4 resistors, 2 ICs, 1 diode and 1 connector.
ℹ️ The main FLO repository is at https://github.com/strawlab/flo ℹ️.
This repository hosts build instructions and manual for the FLO Bring Your Own (BYO) camera insect tracking/filming. Included are hardware design files and other large, binary files.
FLO is a method for videography using a camera system that automatically moves to follow the subject.
FLO is described in the following publication:
Vo-Doan TT, Titov VV, Harrap MJM, Lochner S, Straw AD. High Resolution Outdoor Videography of Insects Using Fast Lock-On Tracking. bioRxiv (2023) doi:10.1101/2023.12.20.572558.

A bare-minimum hardware

"Bring Your Own Camera".
The setup for filming flying bees carrying a retroreflective marker.
hardware description is in ./byo directory
.jpg)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | C | digikey-footprints:0805 | C1, C2, C3, C4 |
| 4 | R | digikey-footprints:0805 | R1, R2, R3, R4 |
| 1 | 0015912120 | digikey-footprints:PinHeader_2x6_P2.54mm_Vertical_SMD | J1 |
| 1 | LT1885 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | OPR5911 | beetrax-footprints:OPR5911 | D1 |
| 1 | QP1-6TO | beetrax-pcb2:QP1-6TOv2 | U2 |
The 12 most common of 15 parts.

strawlab/flo-hardware
build instructions and manual for the FLO BYO-camera insect tracking/filming setup

strawlab/flo-hardware
build instructions and manual for the FLO BYO-camera insect tracking/filming setup

strawlab/flo-hardware
build instructions and manual for the FLO BYO-camera insect tracking/filming setup

strawlab/flo-hardware
build instructions and manual for the FLO BYO-camera insect tracking/filming setup

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk

It measures 17.8 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the OPR5911. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the strawlab/flo-hardware repository on GitHub, at the commit this page was made from: the board is beetrax-pcb2/beetrax-pcb2.kicad_pcb and its schematic beam-driver/dual-cam-pcb v2/dual-cam-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask strawlab before reusing the design.