
XIAO ESP32S3 Plus V1.1 250724
Josephrp/meshtonic
Meshtonic H4M Companion — ESP32-S3 carrier for PortaPack H4M / Mayhem with multi-slot LoRa and standalone Meshtastic

Block amp front is an open-source printed circuit board by storskegg, from the storskegg/Block-amp-front repository on GitHub, published under the Apache-2.0 licence. It is a 6-layer board of 188 × 54 mm with 71 parts on 32 nets, routed with 132 tracks and 589 vias.
Its parts include 27 connectors, 14 resistors, 10 capacitors, 4 diodes and 2 transistors. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H4, H5, H6, H7, H8 |
| 4 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C5, C6, C7, C8 |
| 4 | 4M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9, R10, R11 |
| 4 | LED | LED_THT:LED_D5.0mm_Clear | D1, D2, D3, D4 |
| 3 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R14, R15 |
| 3 | C | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P2.50mm_P5.00mm | C2, C3, C4 |
| 3 | Pwr +30V Out | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J10, J11, J12 |
| 3 | Pwr +9V Out | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J7, J8, J9 |
| 3 | Pwr GND Out | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J4, J5, J6 |
| 2 | 1000nF | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C9, C10 |
| 2 | 360R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6, R7 |
| 2 | 5.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R13 |
| 2 | B100k | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV7, RV8 |
| 2 | B250k | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV2, RV3 |
| 2 | LSK170 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 68pF | Capacitor_THT:C_Rect_L7.0mm_W3.5mm_P2.50mm_P5.00mm | C1 |
| 1 | A1M | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV5 |
| 1 | B1M | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | B20k | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV4 |
| 1 | Bal_Vol_gnd | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J26 |
| 1 | Bal_vol_to_xformr | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J27 |
| 1 | Gnd_in_phono | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J16 |
| 1 | Pwr +30V In | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J3 |
| 1 | Pwr +9V In | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J2 |
| 1 | Pwr GND In | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | Sig_de_Stg2 | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J20 |
| 1 | Sig_from_Stg3 | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J32 |
| 1 | Sig_in_phono | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J14 |
| 1 | Sig_to_Stg1 | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J13 |
| 1 | Sig_to_Stg3 | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J21 |
| 1 | Stg2_pent_S2 | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J18 |
| 1 | Stg2_pent_gnd | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J17 |
| 1 | Stg2_pent_pwr | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J19 |
| 1 | Unbal_Vol_gnd | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J29 |
| 1 | Unbal_vol_to_xformr | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J30 |
| 1 | Vol_gnd | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J28 |
| 1 | sig_gnd | Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | J22 |

Josephrp/meshtonic
Meshtonic H4M Companion — ESP32-S3 carrier for PortaPack H4M / Mayhem with multi-slot LoRa and standalone Meshtastic

mikewen2024/Eyeliner
A 1lb (antweight) melty-brain combat robot. A melty-brain spins the entire chassis at 1,000–2,000 RPM while pulsing drive motors 100 times/second to achieve controlled translational movement — maximum hitting power, and…

gokselozgur5/pcb-design-collar-tracker
Small GPS and cellular dog-collar tracker. KiCad sources, DFM evidence and ongoing nano-SIM layout work.


It measures 188 × 54 mm and has 6 copper layers, 1.65 mm thick.
71 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the storskegg/Block-amp-front repository on GitHub, at the commit this page was made from: the board is Block-amp-front.kicad_pcb and its schematic Block-amp-front.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).