Skip to the content
6 layers188 × 54 mmBlock amp front, the printed circuit board in 3D
Size
188 × 54 mm
Copper layers
6
Thickness
1.65 mm
Parts
71
Nets
32
Pads
125
Tracks, vias
132, 589
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Mar 2025
Updated
7 Mar 2025

Overview

Block amp front is an open-source printed circuit board by storskegg, from the storskegg/Block-amp-front repository on GitHub, published under the Apache-2.0 licence. It is a 6-layer board of 188 × 54 mm with 71 parts on 32 nets, routed with 132 tracks and 589 vias.

Its parts include 27 connectors, 14 resistors, 10 capacitors, 4 diodes and 2 transistors. It belongs with the audio and music boards of this library.

README

README.md

Block-amp-front

Parts

71
QtyValueFootprintReferences
7MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H4, H5, H6, H7, H8
4100nFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC5, C6, C7, C8
44MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8, R9, R10, R11
4LEDLED_THT:LED_D5.0mm_ClearD1, D2, D3, D4
3100RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R14, R15
3CCapacitor_THT:C_Rect_L7.0mm_W3.5mm_P2.50mm_P5.00mmC2, C3, C4
3Pwr +30V OutConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ10, J11, J12
3Pwr +9V OutConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ7, J8, J9
3Pwr GND OutConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ4, J5, J6
21000nFCapacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mmC9, C10
2360RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR6, R7
25.1kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR12, R13
2B100kPotentiometer_THT:Potentiometer_Alps_RK163_Single_HorizontalRV7, RV8
2B250kPotentiometer_THT:Potentiometer_Alps_RK163_Single_HorizontalRV2, RV3
2LSK170Package_TO_SOT_THT:TO-92_Inline_WideQ1, Q2
11MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
147kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3
168pFCapacitor_THT:C_Rect_L7.0mm_W3.5mm_P2.50mm_P5.00mmC1
1A1MPotentiometer_THT:Potentiometer_Alps_RK163_Single_HorizontalRV5
1B1MPotentiometer_THT:Potentiometer_Alps_RK163_Single_HorizontalRV1
1B20kPotentiometer_THT:Potentiometer_Alps_RK163_Single_HorizontalRV4
1Bal_Vol_gndConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ26
1Bal_vol_to_xformrConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ27
1Gnd_in_phonoConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ16
1Pwr +30V InConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ3
1Pwr +9V InConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ2
1Pwr GND InConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ1
1RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
1Sig_de_Stg2Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ20
1Sig_from_Stg3Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ32
1Sig_in_phonoConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ14
1Sig_to_Stg1Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ13
1Sig_to_Stg3Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ21
1Stg2_pent_S2Connector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ18
1Stg2_pent_gndConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ17
1Stg2_pent_pwrConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ19
1Unbal_Vol_gndConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ29
1Unbal_vol_to_xformrConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ30
1Vol_gndConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ28
1sig_gndConnector_Pin:Pin_D1.1mm_L8.5mm_W2.5mm_FlatForkJ22

Similar boards

  • 6 layers17.8 × 21.1 mmXIAO ESP32S3 Plus V1.1 250724, the printed circuit board in 3D

    XIAO ESP32S3 Plus V1.1 250724

    Josephrp/meshtonic

    Meshtonic H4M Companion — ESP32-S3 carrier for PortaPack H4M / Mayhem with multi-slot LoRa and standalone Meshtastic

    71 parts11
  • 6 layers22.7 × 19 mmHardware V11, the printed circuit board in 3D

    Hardware V11

    mathieupommery/Keyring-GPSTRACKER

    Small gps keyring with a lot of possibilities

    71 parts5
  • 6 layers17.8 × 21.1 mmXIAO ESP32S3 PLUS V1.0 241025, the printed circuit board in 3D

    XIAO ESP32S3 PLUS V1.0 241025

    mikewen2024/Eyeliner

    A 1lb (antweight) melty-brain combat robot. A melty-brain spins the entire chassis at 1,000–2,000 RPM while pulsing drive motors 100 times/second to achieve controlled translational movement — maximum hitting power, and…

    71 parts1MIT
  • 6 layers178.7 × 40.9 mmFLED Board, the printed circuit board in 3D

    FLED Board

    AllThisAndThat/Beacon

    Learn embedded programming

    71 parts
  • 6 layers60 × 25 mmServo, the printed circuit board in 3D

    Servo

    brokenpotatoes/Servo

    71 parts
  • 6 layers40 × 32 mmCollar tracker, the printed circuit board in 3D

    Collar tracker

    gokselozgur5/pcb-design-collar-tracker

    Small GPS and cellular dog-collar tracker. KiCad sources, DFM evidence and ongoing nano-SIM layout work.

    71 parts
  • 6 layersSMU, the printed circuit board in 3D

    SMU

    oosan1/OriginalSMU_KKHS

    71 parts
  • 6 layers18.3 × 36.1 mmSensor schematics, the printed circuit board in 3D

    Sensor schematics

    sugar-sensor/sensor-schematics

    Sensor HW

    70 partsMIT

Questions

How big is the Block amp front PCB?

It measures 188 × 54 mm and has 6 copper layers, 1.65 mm thick.

What parts does the Block amp front use?

71 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Block amp front KiCad files?

From the storskegg/Block-amp-front repository on GitHub, at the commit this page was made from: the board is Block-amp-front.kicad_pcb and its schematic Block-amp-front.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Block amp front design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).