Skip to the content
2 layers30 × 100 mmCv extractor, the printed circuit board in 3D

This is an envelope detector eurorack module. It is intended to take in eurorack signals or audio input and output the envelope.

Size
30 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
20
Pads
100
Tracks, vias
245, 33
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
2 Apr 2024
Updated
2 Apr 2024

Overview

Cv extractor is an open-source printed circuit board by stormyweathers, from the stormyweathers/cv-extractor repository on GitHub. It is a 2-layer board of 30 × 100 mm with 35 parts on 20 nets, routed with 245 tracks and 33 vias.

Its parts include 10 resistors, 7 capacitors, 3 connectors, 2 diodes and 1 IC.

README

README.md

CV Extractor

This is an envelope detector eurorack module. It is intended to take in eurorack signals or audio input and output the envelope.

Description of schematic

An input waveform passes through an adjustable gain noninverting amplifier, then an active rectifier, then finally a 2-pole sallen-key LPF with adjustable gain and cutoff.

Features

text
* Buffered input/output
* Adjustable input/output gain
* Adjustable timescale of envelope detection

Rack info

text
* +12V: ?? mA
* -12V: ?? mA
*  +5V: unused
* Width: 8HP   

Issues

The module works, but its not that great.

text
* Gain Pots are oriented reverse, unintuitive
* Turning the cutoff knob can cause it to oscillate
* The gain range is too large

Parts

35
QtyValueFootprintReferences
101kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R8, R9, R12
3470nFCapacitor_SMD:C_0603_1608MetricC1, C5, C6
2100uFCapacitor_SMD:CP_Elec_6.3x7.7C7, C8
210kmatterwave:pot_bourns_PTV09RV2, RV3
21nFCapacitor_SMD:C_0603_1608MetricC9, C10
2DDiode_SMD:D_SOD-323FD1, D2
2HoleMountingHole:MountingHole_3.2mm_M3H1, H2
2SolderJumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2
1100ksynth-components:dual-pot-P120RV1
11MResistor_SMD:R_0603_1608MetricRD1
1Absmatterwave:TestPoint_TP107TP2
1CV Outsynth-components:mono-jack-thonkJ2
1GNDmatterwave:TestPoint_TP107TP4
1Inputmatterwave:TestPoint_TP107TP1
1Outputmatterwave:TestPoint_TP107TP3
1TL074Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU1
1Wave Insynth-components:mono-jack-thonkJ1
1power_connector_10possynth-components:power_connector_10posJ3

Similar boards

  • 2 layers97.2 × 59.1 mmArmLEDsPrototype, the printed circuit board in 3D

    ArmLEDsPrototype

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    35 parts915
  • 2 layers62 × 42 mmMod cell 0 02, the printed circuit board in 3D

    Mod cell 0 02

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    35 parts756
  • 2 layers75 × 26 mmDIY detector electron variant, the printed circuit board in 3D

    DIY detector electron variant

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    35 parts558BSD-2-Clause
  • 2 layers45 × 25 mmReCamera Basically Board, the printed circuit board in 3D

    ReCamera Basically Board

    Seeed-Studio/OSHW-reCamera-Series

    reCamera is a series of open-source AI cameras.

    35 parts495Apache-2.0
  • 2 layers160.8 × 24.4 mmHUD VID RCD PANEL, the printed circuit board in 3D

    HUD VID RCD PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    35 parts431
  • 2 layers75 × 50 mmBackplane tester, the printed circuit board in 3D

    Backplane tester

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    35 parts397Apache-2.0
  • 2 layers50 × 20.5 mmOtterIron PRO Top, the printed circuit board in 3D

    OtterIron PRO Top

    Jana-Marie/Otter-Iron-PRO

    USB-PD soldering station for JBC C245 handles.

    35 parts321
  • 2 layers50.5 × 67.1 mmHackheld Vega, the printed circuit board in 3D

    Hackheld Vega

    SpacehuhnTech/HackHeld

    Hackable Handheld

    35 parts277

Questions

How big is the Cv extractor PCB?

It measures 30 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cv extractor use?

35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cv extractor KiCad files?

From the stormyweathers/cv-extractor repository on GitHub, at the commit this page was made from: the board is cv-extractor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cv extractor design in my own project?

Its repository states no licence, so its author keeps all rights: ask stormyweathers before reusing the design.