
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Open source Leonardo shield for home built SDVX / KSM controllers
LeoSDVX Shield is an open-source printed circuit board by Stormpegy, from the Stormpegy/LeonardoSDVX-Shield repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 11 parts on 35 nets, routed with 122 tracks and 0 vias.
It belongs with the AVR (ATmega, ATtiny) boards of this library.
Open source IO shield for homebuilt SDVX / K-Shoot Mania style controllers.
Uses the kicad libraries by sparkfun https://github.com/sparkfun/SparkFun-KiCad-Libraries
Uses arduino-kicad-library by Alarm-Siren https://github.com/Alarm-Siren/arduino-kicad-library
Originally built to use the cons&stuff leovxhq code but pinout has been modified to make some of the routing neater.
Cons&Stuff SDVX guide Cons&Stuff
Original code can be found here Cons & Stuff leovx Code
LED Pinout code changes between original leovx/leovxhq and what is required for this board.
To update this code look for line 18 on leovx or line 27 on leovxhq and replace with the new example.
Original
uint8_t ledPins[] = {6,7,8,9,10,11,12};
New
uint8_t ledPins[] = {12,11,10,9,8,7,6};
I won't tell you how to open and flash this code, just download the arduino IDE and google the rest, It's not too complicated, ask on discord if you need a hand.
REV 2 released
Replaced JST-XH connector footprints with generic 2.54mm header footprints, original footprints were well out of spec and didn't fit 2.54mm headers/plugs; thank you SirusDoma (C&S discord) for bringing this to my attention.
System pin rotated to have GND on the same side as all other connections (I have also forgotten why the system pin exists but I'm leaving it there /shrug)
Removed white border on leonardo shield footprint, library updated and included.
| Button | Pin # | Button # | LED Pin # |
|---|---|---|---|
| Start | 13 | Button 1 | 12 |
| BT-A | A0 | Button 2 | 11 |
| FX-L | A1 | Button 3 | 10 |
| BT-B | A2 | Button 4 | 9 |
| BT-C | A3 | Button 5 | 8 |
| FX-R | A4 | Button 6 | 7 |
| BT-D | A5 | Button 7 | 6 |
| Encoders | DATA 1 | DATA 2 |
|---|---|---|
| Left knob (VOL-L) | 0 | 1 |
| Right knob (VOL-R) | 2 | 3 |


x32 header pins, standard 2.54mm spacing (Optional +2 if you wish to put headers on the system pins)
Very cheap, Can be found for as cheap as $1USD for 10pcs 40pin online.
x9 JST-XH 4 Pin style straight THT connectors (Ensure you get straight through hole, you will likely definitely struggle if you get right angle or smd)
These XH connectors can be found as sets with cables as well, It's recommend to get 25-35cm wires if you get a set. JST brand is not important, Just ensure they are XH style spacing (2.5mm/2.54mm)
Crimps, Buttons, Leonardo and all the other parts to build a controller are also required but this just covers the parts for this shield, reference the cons&stuff for a great guide on making your own controller.
These can be ordered very cheaply through a PCB manufacturer such as JLCPCB, they cost $2USD for 5-10qty and shipping is around $5USD to Malaysia and $6USD to Australia.
Simply download LeonardoSDVX-Shield-Gerber.zip and upload it to your preferred PCB manufacturer, I use JLCPCB though there are plenty out there.
I highly recommend leaving the settings on JLCPCB as default unless you know what you're doing.
Layers - 2
Dimensions - 53 x 69 mm, don't change, it automatically enters these.
PCB thickness - 1.6mm
PCB Colour - Feel free to change this one though it will cost more, they use black silkscreen for white pcbs and white silkscreen for everything else.
Surface - HASL (with lead) (Other options are more expensive and not worth it for this simple board)
Copper weight - 1oz
Gold fingers - No
Panel - No
Different design - 1
Make parts list
Add imgs to readme.md (this doc)
Add more info on the code change / LED pinout change
Modify the shield footprint to remove the white outline? unsure how that will go with manufacturing
Fix the big mistake on rev 1 :)
Created by https://github.com/Stormpegy Feel free to contact me in the cons&stuff discord server under the same username for any assistance.
Cons&stuff discord can be found here.
https://consandstuff.github.io/
Feel free to modify and redistribute this design in any way you please just give credit for original design and keep appropriate links and licenses for the used libraries.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | CONN_04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J1, J2, J3, J4, J5, J6, J7, J8, J9 |
| 1 | Arduino_Leonardo_Shield | Arduino:Arduino_Leonardo_Shield_noborder | XA1 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J10 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Stormpegy/LeonardoSDVX-Shield repository on GitHub, at the commit this page was made from: the board is pcb/LeoSDVX-Shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Stormpegy before reusing the design.