

Pmod usb serial
Place to keep all my PMOD modules
- Size
- 33.1 × 17 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 31
- Pads
- 69
- Tracks, vias
- 83, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Oct 2024
- Updated
- 18 Dec 2025
Overview
Pmod usb serial is an open-source printed circuit board by SteveLRojas, from the SteveLRojas/pmod_modules repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 33.1 × 17 mm with 10 parts on 31 nets, routed with 83 tracks and 5 vias.
Its parts include 3 resistors, 2 capacitors, 2 diodes, 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.
README
pmod_usb_serial/README.mdpmod_usb_serial
USB to UART module using a CP2102 chip. The module has a 6 pin PMOD interface suitable for the Basys 2 FPGA board.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 470 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | orange | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U1 |
| 1 | PMOD-Device-x1-Type-1-GPIO | pmod-conn_6x2:pmod_type_1_pin | PMOD1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J1 |
More from SteveLRojas/pmod_modules
9- 2 layers47.2 × 69.1 mm

- 2 layers44.3 × 18.3 mm

- 2 layers54 × 22.9 mm

- 2 layers46.5 × 18.5 mm

Pmod level shifter 8p
SteveLRojas/pmod_modules
Place to keep all my PMOD modules
14 partsCERN-OHL-P-2.0 - 2 layers31.7 × 86.4 mm

- 2 layers28.5 × 16.3 mm

Pmod level shifter 4p
SteveLRojas/pmod_modules
Place to keep all my PMOD modules
10 partsCERN-OHL-P-2.0 - 2 layers32.1 × 20 mm

- 2 layers25 × 19 mm

- 2 layers22.9 × 20.3 mm

Similar boards
- 2 layers57 × 55.2 mm

LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm

Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm

Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm

- 2 layers44.3 × 30.5 mm

Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm

Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm

Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the Pmod usb serial PCB?
It measures 33.1 × 17 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pmod usb serial use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pmod usb serial KiCad files?
From the SteveLRojas/pmod_modules repository on GitHub, at the commit this page was made from: the board is pmod_usb_serial/pmod_usb_serial.kicad_pcb and its schematic PMOD_HDMI/PMOD_HDMI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pmod usb serial design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).