

PMOD MEM
Place to keep all my PMOD modules
- Size
- 22.9 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 11
- Pads
- 34
- Tracks, vias
- 88, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Oct 2024
- Updated
- 18 Dec 2025
Overview
PMOD MEM is an open-source printed circuit board by SteveLRojas, from the SteveLRojas/pmod_modules repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 22.9 × 20.3 mm with 6 parts on 11 nets, routed with 88 tracks and 4 vias.
It is built around the W25Q16JVSNIQ. Its parts include 2 resistors, 2 ICs and 1 capacitor.
Main components
1README
pmod_usb_serial/README.mdpmod_usb_serial
USB to UART module using a CP2102 chip. The module has a 6 pin PMOD interface suitable for the Basys 2 FPGA board.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | CAT24M01W | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | PMOD-Device-x2-Type-1A-GPIO | pmod-conn_6x2:pmod_pin_array_6x2 | PMOD1 |
| 1 | W25Q16JVSNIQ | SamacSys_Parts:SOIC127P600X175-8N | IC1 |
More from SteveLRojas/pmod_modules
9- 2 layers47.2 × 69.1 mm

- 2 layers44.3 × 18.3 mm

- 2 layers54 × 22.9 mm

- 2 layers46.5 × 18.5 mm

Pmod level shifter 8p
SteveLRojas/pmod_modules
Place to keep all my PMOD modules
14 partsCERN-OHL-P-2.0 - 2 layers31.7 × 86.4 mm

- 2 layers28.5 × 16.3 mm

Pmod level shifter 4p
SteveLRojas/pmod_modules
Place to keep all my PMOD modules
10 partsCERN-OHL-P-2.0 - 2 layers32.1 × 20 mm

- 2 layers33.1 × 17 mm

- 2 layers25 × 19 mm

Similar boards
- 4 layers86 × 34 mm

Bsl drv v1
jackw01/scanlight
A better light source for scanning color negative film
157 parts397CERN-OHL-W-2.0 - 6 layers150 × 87 mm

POWERCORE V2.0 MOTHERBOARD
Rack-Robotics/Powercore-V2.0
Open-Source wire EDM power supply by Rack Robotics, Inc.
254 parts258 - 4 layers55 × 73.5 mm

- 2 layers96.5 × 55 mm

- 4 layers100 × 180 mm

- 4 layers111.5 × 83.9 mm

SF2000
jbilander/SF2000
Spitfire 2000, A low-end 42 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 2000 co-pro slot (or A500 through an adapter).
160 parts33CC-BY-SA-4.0 - 2 layers99 × 56.3 mm

ReflowOven controller
TilenTinta/ReflowOven_controller
An open source controller for converting kitchen toaster oven to reflow oven
122 parts5MIT - 4 layers56 × 71.5 mm

Battery powered
homelith/pico-disp-ident
Custom firmware to make some RP2040 board working as DVI display tester & identifier
64 parts2MIT
Questions
How big is the PMOD MEM PCB?
It measures 22.9 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PMOD MEM use?
6 parts, built around the W25Q16JVSNIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PMOD MEM KiCad files?
From the SteveLRojas/pmod_modules repository on GitHub, at the commit this page was made from: the board is PMOD_MEM/V1.0/PMOD_MEM.kicad_pcb and its schematic PMOD_HDMI/PMOD_HDMI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PMOD MEM design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).