

Rosco I2C
I2C Interface expansion for Rosco-m68k
- Size
- 50.8 × 104.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 98
- Pads
- 210
- Tracks, vias
- 714, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Sep 2022
- Updated
- 8 Oct 2022
Overview
Rosco I2C is an open-source printed circuit board by stevegg, from the stevegg/Rosco-I2C repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50.8 × 104.4 mm with 21 parts on 98 nets, routed with 714 tracks and 0 vias.
It is built around the ATMEGA1284-PU and 74HC245D. Its parts include 11 capacitors, 5 connectors, 4 ICs and 1 crystal. It belongs with the AVR (ATmega, ATtiny) and FPGA and CPLD boards of this library.
Main components
2ATMEGA1284-PU
PDIP-401.8V~5.5V 10bit 128KB 20MHz 32 4KB AVR FLASH PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)74HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
README
README.mdRosco-I2C
I2C Interface expansion for Rosco-m68k
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | .1uF | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C2, C3, C4, C5, C7, C8, C9 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C10, C11 |
| 2 | 15pf | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C1, C6 |
| 2 | GAL16V8 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U3, U4 |
| 2 | I2C Connector | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J3 |
| 1 | 74HC245 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U2 |
| 1 | ATmega1284-P | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | Crystal | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | Future | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | Rosco M68k Connector | Connector_PinHeader_2.54mm:PinHeader_2x32_P2.54mm_Vertical | J2 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
Similar boards
- 2 layers80.1 × 56.9 mm

- 2 layers106 × 95.4 mm

- 2 layers90.2 × 68.6 mm

CBM D9096
InsaneDruid/CBM-D9096
Cost- and feature-reduced version of the PetSD+ from Nils Eiler, designed specifically for headless operation in an external enclosure, connected with a true GPIB cable, similar to a 9060 or 9090.
34 parts5 - 2 layers150 × 100 mm

- 4 layers101.6 × 50.8 mm

- 2 layers160 × 100 mm

- 2 layers68.6 × 114.3 mm

- 2 layers139.7 × 139.7 mm

Questions
How big is the Rosco I2C PCB?
It measures 50.8 × 104.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rosco I2C use?
21 parts, built around the ATMEGA1284-PU and 74HC245D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rosco I2C KiCad files?
From the stevegg/Rosco-I2C repository on GitHub, at the commit this page was made from: the board is design/Rosco I2C.kicad_pcb and its schematic design/Rosco I2C.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rosco I2C design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).