

Master Controller PCB
Controller for Dance Dance Revolution and Stepmania Games
- Size
- 102.9 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 40
- Pads
- 113
- Tracks, vias
- 148, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Jan 2025
- Updated
- 13 Mar 2025
Overview
Master Controller PCB is an open-source printed circuit board by stephenhouser, from the stephenhouser/DDR-Pad repository on GitHub. It is a 2-layer board of 102.9 × 50.8 mm with 21 parts on 40 nets, routed with 148 tracks and 0 vias.
Its parts include 16 connectors and 1 IC. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
README
README.mdcategory: woodworking
Todo
-
√ Clear acrylic ~ 12x12x 0.354 @ 10 = 180 + $50 shipping
-
https://www.tapplastics.com/product/plastics/cut_to_size_plastic/polycarbonate_sheets/516
-
2024/01/01 - orderd 10 11x11x0.354" (3/8")
-
$229.94
-
√ M6 Screws, M6 Nylon nuts -- Granger
-
2024/01/03 Picked up nuts, screws on backorder to 2024/01/08
-
$60
-
Decals ~ $70
-
Arduino/teensy -- will it be fast enough?
-
perhaps microcontrollers at each pad sending data and lights?
-
Metal corners?
-
16 gague, need sheet brake (Rex?)
-
1.25" SteelTex no-thread pipe -- will it be sturdy enough
-
1.25 is only in silver color
-
2 bases, 2 90-deg, 3 poles
The Build we are working from
- The hardware: DIY Arcade DDR Metal Dance Pad With LED Under $500
- The electronics: 6 Panel DDR USB Controller With LED
Other Builds
- Mystic Steps build, uses a AtMega32U (32u chipset for USB I imagine)
- andrewhlu's build, uses STM32L476G board
- Sensor Channels on Thingiverse, replacements for original DDR
Making Pads
- https://www.hackmycab.com/?portfolio=arrow-panels-part-1-making-new-polycarb-panels
- https://www.hackmycab.com/?portfolio=arrow-panels-part-2-arrow-decals
Lights
- 8x6 Lights for original DDR
- 8x8 addressable LED modules from Amazon
- ws2812 should be able to do about 64fps with 512 in a chain.
- will need power injection at each row?
- https://electronics.stackexchange.com/questions/338248/ws2812b-response-time
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Analog | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J15 |
| 1 | LEDs | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J16 |
| 1 | Pad 1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Pad 2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Pad 3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | Pad 4 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | Pad 5 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8 |
| 1 | Pad 6 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | Pad 7 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J10 |
| 1 | Pad 8 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11 |
| 1 | Pad 9 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |
| 1 | Pads | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J14 |
| 1 | Pads 1-3 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | Pads 4-6 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Pads 7-9 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | Power | kicad-stephenhouser:screw_terminal_01x02_p7.62mm | J13 |
| 1 | Teensy3.2 | teesny:Teensy30_31_32_LC | U1 |
The 17 most common of 21 parts.
More from stephenhouser/DDR-Pad
1- 2 layers118.7 × 119.4 mm

Similar boards
- 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

- 2 layers45.5 × 42.9 mm

Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm

Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm

QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm

- 2 layers161.3 × 111.8 mm

Questions
How big is the Master Controller PCB PCB?
It measures 102.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Master Controller PCB use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Master Controller PCB KiCad files?
From the stephenhouser/DDR-Pad repository on GitHub, at the commit this page was made from: the board is DDR Controller PCB/Master Controller PCB.kicad_pcb and its schematic DDR Controller PCB/Master Controller PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Master Controller PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask stephenhouser before reusing the design.