
Control Board-20230716
stephenhouser/Control_Panel_1
Old-school hard-switch control panel for Home Automation

Old-school hard-switch control panel for Home Automation
Master Control Panel is an open-source printed circuit board by stephenhouser, from the stephenhouser/Control_Panel_1 repository on GitHub. It is a 2-layer board of 200 × 130 mm with 40 parts on 64 nets, routed with 167 tracks and 0 vias.
Its parts include 27 diodes, 12 switches and 1 IC. It belongs with the home automation and IoT boards and the ESP8266 boards of this library.
The old-school hard-switch control panel for Home Automation.

This project has a few parts, each documented in their own section below.
The project box is a BUD Industries PC-11495 Plastic Style F Box 9" W x 5" H x 8.5" D, Natural which I found on Amazon for ~$32 USD. The Dimensions are available from BUD Industries (thank you!)
Another option, without the top display is the BUD Industries PC-11493 Plastic Style F Box 9" L x 8.5" W x 1.98" H, Natural for ~$30 USD. The Dimensions are available from BUD Industries (thank you!)
You can find details on these boxes in general from BUD Industries

Look in the Box_Panels directory. These are SVG files for a laser cutter, deisgned to be etched from the back side (will look reversed)
Process:
Uses KiCad v7.x for two PCB's; Control Board and Display Board.
Components:
)
)
Components:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | APA-106-F5 | LED_THT:LED_D5.0mm-4_RGB | D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27 |
| 12 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 12 | SW_SPDT | toggle:SW_100SP1T1B4M2QE | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12 |
| 1 | NodeMCU1.0(ESP-12E) | esp8266:NodeMCU1.0(12-E) | U1 |

stephenhouser/Control_Panel_1
Old-school hard-switch control panel for Home Automation

stephenhouser/Control_Panel_1
Old-school hard-switch control panel for Home Automation

stephenhouser/Control_Panel_1
Old-school hard-switch control panel for Home Automation


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 200 × 130 mm and has 2 copper layers, 1.6 mm thick.
40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the stephenhouser/Control_Panel_1 repository on GitHub, at the commit this page was made from: the board is Control Board ESP8266/Master Control Panel.kicad_pcb and its schematic Control Board ESP8266/Master Control Panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask stephenhouser before reusing the design.