
PopBumperController
meh2481/picopinball
Physical Pi Pico-Powered Pinball table heavily inspired by Space Cadet

Project contains all elements from the design of the PCB for the mechanical locks and its components as well as the mobile application to access the app to send the necessary commands to lock/unlock the lock and to store all sensible information within the cache of the android device
Door Lock is an open-source printed circuit board by stephen-benavides, from the stephen-benavides/SmartMechanicalLock repository on GitHub. It is a 2-layer board of 58.2 × 114.8 mm with 18 parts on 49 nets, routed with 114 tracks and 3 vias.
It is built around the TIP102. Its parts include 3 connectors, 3 switches, 2 resistors, 2 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Project contains all elements from the design of the PCB for the mechanical locks and its components as well as the mobile application to access the app to send the necessary commands to lock/unlock the lock and to store all sensible information within the cache of the android device
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | HOLE1, HOLE3 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2, SW3 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P5.08mm_Vertical_AnodeUp | D1 |
| 1 | Backup | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Battery | Boost:Battery_Supply | B1 |
| 1 | BoostConverter | Boost:BoostConverter | U2 |
| 1 | ESP32R | Boost:ESP32_Diego | U1 |
| 1 | JST-PH | Boost:JST-PH | J3 |
| 1 | Keypad | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | LED_RCGB | LED_THT:LED_D5.0mm-4_RGB_Staggered_Pins | D2 |
| 1 | SPDT | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | SW1 |
| 1 | TIP102 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
The 16 most common of 18 parts.

meh2481/picopinball
Physical Pi Pico-Powered Pinball table heavily inspired by Space Cadet


chrskly/electric-mustang-wiring
Wiring diagrams and PCBs for my Mustang EV conversion project




VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
It measures 58.2 × 114.8 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the TIP102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the stephen-benavides/SmartMechanicalLock repository on GitHub, at the commit this page was made from: the board is Senior Project - Beta/Smart Lock (Pending Name)-20201122T195937Z-001/Smart Lock (Pending Name)/Hardware/PCB Design/Door_Lock.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask stephen-benavides before reusing the design.