Skip to the content
2 layers35.5 × 36.8 mmMIDIController AudioShield, the printed circuit board in 3D

MIDIController AudioShield

stefanhepp/eOrgan

Electronic organ console project.

Size
35.5 × 36.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
12
Pads
23
Tracks, vias
9, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Oct 2013
Updated
7 Nov 2024

Overview

MIDIController AudioShield is an open-source printed circuit board by stefanhepp, from the stefanhepp/eOrgan repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 35.5 × 36.8 mm with 6 parts on 12 nets, routed with 9 tracks and 0 vias.

README

README.md

README

This project contains various parts of a midi-organ. The project consists of four main parts:

  • The Pedalboard: a 29 note midi foot pedal, mostly ARGO compliant. This odd number of notes was choosen because of size restrictions (I wanted it to fit under my e-piano).
  • The organ console: contains stops, a lcd display, and all connectors and hardware to wire it to a PC. Up to three midi keyboards can be used as input devices, as well as the midi pedalboard.
  • The organ desk: a framework for all the parts, contains speakers and some additional foot-stops. This is also designed to hold the PC.
  • The software: A controller software which allows access to some special features of the hardware and sets up the software synthesizer.

License

Shield: CC BY-SA 4.0

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

CC BY-SA 4.0

Parts

6
QtyValueFootprintReferences
3MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3
1Conn_02x05_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ1
1LineInCustom_Connectors:Jack_3.5mm_Ledino_KB3SPRS_Horizontal_StereoJ2
1LineOutCustom_Connectors:Jack_3.5mm_Ledino_KB3SPRS_Horizontal_StereoJ3

More from stefanhepp/eOrgan

12
  • 2 layers150 × 100 mmMIDIController IO MIDI, the printed circuit board in 3D

    MIDIController IO MIDI

    stefanhepp/eOrgan

    Electronic organ console project.

    49 partsCC-BY-SA-4.0
  • 2 layers150 × 100 mmMIDIController, the printed circuit board in 3D

    MIDIController

    stefanhepp/eOrgan

    Electronic organ console project.

    41 partsCC-BY-SA-4.0
  • 2 layers150 × 100 mmKeyboardScanner, the printed circuit board in 3D

    KeyboardScanner

    stefanhepp/eOrgan

    Electronic organ console project.

    36 partsCC-BY-SA-4.0
  • 2 layers125 × 38.5 mmPedalEncoder, the printed circuit board in 3D

    PedalEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    35 partsCC-BY-SA-4.0
  • 2 layers150 × 100 mmPistonEncoder, the printed circuit board in 3D

    PistonEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    32 partsCC-BY-SA-4.0
  • 2 layers110 × 53 mmTechnicsEncoder, the printed circuit board in 3D

    TechnicsEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    32 partsCC-BY-SA-4.0
  • 2 layers150 × 100 mmKeyboardEncoder, the printed circuit board in 3D

    KeyboardEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    30 partsCC-BY-SA-4.0
  • 2 layers95 × 58 mmToeStudEncoder, the printed circuit board in 3D

    ToeStudEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    29 partsCC-BY-SA-4.0
  • 2 layersKeyboardShiftScanner, the printed circuit board in 3D

    KeyboardShiftScanner

    stefanhepp/eOrgan

    Electronic organ console project.

    28 partsCC-BY-SA-4.0
  • 2 layersPedalEncoderAtTiny, the printed circuit board in 3D

    PedalEncoderAtTiny

    stefanhepp/eOrgan

    Electronic organ console project.

    27 partsCC-BY-SA-4.0

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the MIDIController AudioShield PCB?

It measures 35.5 × 36.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MIDIController AudioShield use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MIDIController AudioShield KiCad files?

From the stefanhepp/eOrgan repository on GitHub, at the commit this page was made from: the board is boards/MIDIController-AudioShield/MIDIController-AudioShield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the MIDIController AudioShield design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).