Skip to the content
2 layers33 × 30.5 mmIDC16-ReverseConnector, the printed circuit board in 3D

IDC16-ReverseConnector

stefanhepp/eOrgan

Electronic organ console project.

Size
33 × 30.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
16
Pads
32
Tracks, vias
57, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Oct 2013
Updated
7 Nov 2024

Overview

IDC16-ReverseConnector is an open-source printed circuit board by stefanhepp, from the stefanhepp/eOrgan repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 33 × 30.5 mm with 2 parts on 16 nets, routed with 57 tracks and 0 vias.

README

README.md

README

This project contains various parts of a midi-organ. The project consists of four main parts:

  • The Pedalboard: a 29 note midi foot pedal, mostly ARGO compliant. This odd number of notes was choosen because of size restrictions (I wanted it to fit under my e-piano).
  • The organ console: contains stops, a lcd display, and all connectors and hardware to wire it to a PC. Up to three midi keyboards can be used as input devices, as well as the midi pedalboard.
  • The organ desk: a framework for all the parts, contains speakers and some additional foot-stops. This is also designed to hold the PC.
  • The software: A controller software which allows access to some special features of the hardware and sets up the software synthesizer.

License

Shield: CC BY-SA 4.0

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

CC BY-SA 4.0

Parts

2
QtyValueFootprintReferences
2MIDIConConnector_IDC:IDC-Header_2x08_P2.54mm_VerticalJ1, J2

More from stefanhepp/eOrgan

12
  • 2 layers150 × 100 mmMIDIController IO MIDI, the printed circuit board in 3D

    MIDIController IO MIDI

    stefanhepp/eOrgan

    Electronic organ console project.

    49 partsCC-BY-SA-4.0
  • 2 layers150 × 100 mmMIDIController, the printed circuit board in 3D

    MIDIController

    stefanhepp/eOrgan

    Electronic organ console project.

    41 partsCC-BY-SA-4.0
  • 2 layers150 × 100 mmKeyboardScanner, the printed circuit board in 3D

    KeyboardScanner

    stefanhepp/eOrgan

    Electronic organ console project.

    36 partsCC-BY-SA-4.0
  • 2 layers125 × 38.5 mmPedalEncoder, the printed circuit board in 3D

    PedalEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    35 partsCC-BY-SA-4.0
  • 2 layers150 × 100 mmPistonEncoder, the printed circuit board in 3D

    PistonEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    32 partsCC-BY-SA-4.0
  • 2 layers110 × 53 mmTechnicsEncoder, the printed circuit board in 3D

    TechnicsEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    32 partsCC-BY-SA-4.0
  • 2 layers150 × 100 mmKeyboardEncoder, the printed circuit board in 3D

    KeyboardEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    30 partsCC-BY-SA-4.0
  • 2 layers95 × 58 mmToeStudEncoder, the printed circuit board in 3D

    ToeStudEncoder

    stefanhepp/eOrgan

    Electronic organ console project.

    29 partsCC-BY-SA-4.0
  • 2 layersKeyboardShiftScanner, the printed circuit board in 3D

    KeyboardShiftScanner

    stefanhepp/eOrgan

    Electronic organ console project.

    28 partsCC-BY-SA-4.0
  • 2 layersPedalEncoderAtTiny, the printed circuit board in 3D

    PedalEncoderAtTiny

    stefanhepp/eOrgan

    Electronic organ console project.

    27 partsCC-BY-SA-4.0

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the IDC16-ReverseConnector PCB?

It measures 33 × 30.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the IDC16-ReverseConnector use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IDC16-ReverseConnector KiCad files?

From the stefanhepp/eOrgan repository on GitHub, at the commit this page was made from: the board is boards/IDC16-ReverseConnector/IDC16-ReverseConnector.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the IDC16-ReverseConnector design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).