
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

My university project for computer assisted design classes. I was assigned to design an astable timer using LM741.
Timer astabil cu 741 is an open-source printed circuit board by stefan-panescu, from the stefan-panescu/LM741-Astable-Timer repository on GitHub. It is a 2-layer board of 87.3 × 83.2 mm with 15 parts on 11 nets, routed with 42 tracks and 4 vias.
Its parts include 5 resistors, 2 capacitors and 2 ICs.
My university project for computer assisted design classes. I was assigned to design an astable timer using LM741.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | , | ||
| 2 | 4.7K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R4, R5 |
| 2 | 47K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R2, R3 |
| 1 | 100K | Potentiometer_THT:Potentiometer_Piher_PC-16_Single_Horizontal | U1 |
| 1 | 100μ | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 10K | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Horizontal | ROUT1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1 |
| 1 | 4.7μ | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 9V | Battery:BatteryHolder_MPD_BA9VPC_1xPP3 | BT1 |
| 1 | LM741 | Package_DIP:DIP-8_W7.62mm | U2 |
The 13 most common of 15 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk

It measures 87.3 × 83.2 mm and has 2 copper layers, 1.6 mm thick.
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the stefan-panescu/LM741-Astable-Timer repository on GitHub, at the commit this page was made from: the board is KiCAD model/Timer astabil cu 741.kicad_pcb and its schematic KiCAD model/Timer astabil cu 741.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask stefan-panescu before reusing the design.