Skip to the content
2 layers11.9 × 17 mmYi remote, the printed circuit board in 3D
Size
11.9 × 17 mm
Copper layers
2
Thickness
0.8 mm
Parts
12
Nets
11
Pads
36
Tracks, vias
55, 6
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
3 Feb 2017
Updated
11 Sep 2026

Overview

Yi remote is an open-source printed circuit board by Stefal, from the Stefal/V4MPod repository on GitHub, published under the MIT licence. It is a 2-layer board of 11.9 × 17 mm with 12 parts on 11 nets, routed with 55 tracks and 6 vias.

It is built around the TLP293(E. Its parts include 7 connectors, 3 ICs, 1 capacitor and 1 resistor.

Main components

1

README

README.md

V4mpod

Parts

12
QtyValueFootprintReferences
2TLP293empreinte:SOP-4_4.4x2.8mm_Pitch1.27mm_3DU1, U2
10.1 µFCapacitors_SMD:C_0402C1
15vWire_Pads:SolderWirePad_single_0-8mmDrillJ7
1820Resistors_SMD:R_0402R1
1From Power Button (+) 3.3vWire_Pads:SolderWirePad_single_0-8mmDrillJ1
1From Shutter Button (+) 3.3vWire_Pads:SolderWirePad_single_0-8mmDrillJ2
1Optocoupler_SchmittTrigger_TLP2310empreinte:SO-6_5_pinsIC1
1TEST_1PWire_Pads:SolderWirePad_single_0-8mmDrillJ5
1To Shutter Led + (3.3v)Wire_Pads:SolderWirePad_single_0-8mmDrillJ4
1To Shutter Led - (tension en créneau de 1.8 ou 2.2v)Wire_Pads:SolderWirePad_single_0-8mmDrillJ6
1USBempreinte:USB_Mirco-B_Molex-105017-0001J3

More from Stefal/V4MPod

3

Similar boards

  • 4 layers90 × 74 mmVERTECS CCB A, the printed circuit board in 3D

    VERTECS CCB A

    ezrafielding/vertecs-ccb

    The VERTECS CCB, is an open-source payload interface board leveraging Commercial Off-The-Shelf (COTS) components with a Raspberry Pi Compute Module 4 at its core.

    203 parts7CERN-OHL-P-2.0
  • 4 layers100 × 95 mmPCK Controller, the printed circuit board in 3D

    PCK Controller

    PecaJosef/PCK-CNC

    PCK-CNC is an open-source CNC router designed to offer precision, reliability, and affordability. This machine combines high-performance features with an accessible design that caters to both beginners and CNC…

    278 parts3GPL-3.0
  • 2 layers134.6 × 109.2 mmPacMan, the printed circuit board in 3D

    PacMan

    Lafayette-FSAE/PacMan

    A KiCad Schematic for PacMan, a Accumulator Management Board for the Lafayette FSAE Accumulator Management System

    169 parts1
  • 6 layers60.6 × 100 mmVisionAddOn, the printed circuit board in 3D

    VisionAddOn

    TobiasJaeggi/fpga-mocap

    FPGA based Motion Capture

    195 parts1GPL-3.0
  • 2 layers91 × 55 mmMEISHI, the printed circuit board in 3D

    MEISHI

    YukiYuigishi/MEISHI

    46 parts1MIT
  • 4 layers162.5 × 178.5 mmUDEC.CX, the printed circuit board in 3D

    UDEC.CX

    dermatoid-collab/EVC_FW

    Progetto hardware e firmware del sistema di controllo di un ascensore domestico a trazione (TTF) di LiftingItalia s.r.l. Quattro schede basate su STM32F446, collegate in CAN; il motore è comandato da un VFD.

    464 parts
  • 2 layers100 × 75 mmSELDestroyer, the printed circuit board in 3D

    SELDestroyer

    HEAPLab/SELDestroyer

    The SEL destroyer can be also used as a normal voltage, current, or power monitoring device.

    82 partsMIT
  • 2 layers100 × 80.2 mm12Board PLC4UNI G1W, the printed circuit board in 3D

    12Board PLC4UNI G1W

    Josue-ismael-suriel/Josue--ismael-suriel--paulino--PLC4UNI

    111 parts

Questions

How big is the Yi remote PCB?

It measures 11.9 × 17 mm and has 2 copper layers, 0.8 mm thick.

What parts does the Yi remote use?

12 parts, built around the TLP293(E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Yi remote KiCad files?

From the Stefal/V4MPod repository on GitHub, at the commit this page was made from: the board is kicad/Yi remote/Yi remote.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Yi remote design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).