4 layers37.1 × 61.5 mm
MCLZ8 PCB
MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.
6 parts534
4 layers93.5 × 51.6 mm
SMS to GG
StarshadeRETRO/KiCadFiles1KiCad files for various retro gaming systems and related accessories. These are not intended to be complete projects but rather templates you can use to start your own project.
- Size
- 93.5 × 51.6 mm
- Copper layers
- 4
- Thickness
- 1.62 mm
- Parts
- 6
- Nets
- 55
- Pads
- 144
- Tracks, vias
- 412, 175
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Dec 2022
- Updated
- 8 May 2024
Overview
SMS to GG is an open-source printed circuit board by StarshadeRETRO, from the StarshadeRETRO/KiCadFiles repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 93.5 × 51.6 mm with 6 parts on 55 nets, routed with 412 tracks and 175 vias.
It belongs with the retro computing and games boards of this library.
README
GameSystems/SG/GG/Cartridge/README.mdImportant: Untested WIP! Cutout shapes are probably wrong and will need adjusted.
Blank GG cartridge PCB for making your own cartridge or for designing a replacement.
PCB thickness needs to be to 0.8mm.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Game Gear Slot | !SGFootprints:SG_GG_CARTRIDGE_SLOT_2H | J2 |
| 1 | Gameslot GG Connector | !MiscFootprints:FPC Connector - 45-pin - Multiple | J3 |
| 1 | LOGO | !MiscFootprints:Graphic - Starshade Logo - Mask - Small | G*** |
| 1 | LOGO | !MiscFootprints:Graphic - Starshade Logo - Silk - Small | G*** |
| 1 | LOGO | !MiscFootprints:Graphic - OSHW Logo - Silk - Small | G*** |
| 1 | SMS Fingers | !SGFootprints:SG_SMS_CARTRIDGE_FINGERS | J1 |
Similar boards
- 4 layers15.6 × 51.4 mm
- 4 layers37 × 27 mm
- 4 layers312 × 111.2 mm
PCIexpress x1 full
lucanastasio/PCIexpress-KiCad
PCI express libraries and templates for KiCad
6 parts170 - 4 layers
Esp32s3 Wroom 1
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
6 parts94BSD-3-Clause - 4 layers29.4 × 22.1 mm
Assembly power
buganini/Kikakuka
Kikakuka — KiCad Workspace, Panelization, Build Variants, Differ & FreeCAD PCB Bending and Assembly
6 parts81MIT - 4 layers30.2 × 40.6 mm
Microstrip width nightly
matthuszagh/fmcw
6GHz frequency-modulated continuous-wave radar with real-time range detection
6 parts66Apache-2.0 - 4 layers149.9 × 99.1 mm
Archimedes bus scope
google/myelin-acorn-electron-hardware
Phillip Pearson's retro hardware projects for the Acorn Electron
6 parts59Apache-2.0
Questions
How big is the SMS to GG PCB?
It measures 93.5 × 51.6 mm and has 4 copper layers, 1.62 mm thick.
What parts does the SMS to GG use?
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SMS to GG KiCad files?
From the StarshadeRETRO/KiCadFiles repository on GitHub, at the commit this page was made from: the board is GameSystems/Adapters/SMS-to-GG/SMS-to-GG.kicad_pcb and its schematic GameSystems/Adapters/SMS-to-GG/SMS-to-GG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SMS to GG design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).